Home > Products > Signal Generators > Arbitrary Waveform Generators > Model 4078
25 MHz Dual Channel Arbitrary Waveform / Function Generator
Model 4078
MSRP: $2,295.00
3-year warranty
The 4078 is a versatile high performance dual channel function / arbitrary waveform generator with the largest arbitrary memory depth in its class. The generator combines the ability to produce nearly any conceivable arbitrary waveform with accuracy and precision and a DDS architecture offering easy to use conventional function generator capabilities. Arbitrary waveforms have 14 bit amplitude resolution, 100 MSa/s sample rate and up to 400,000 points length. Waveforms can be output in continuous, triggered, gated or burst modes. The instrument can be remotely controlled using SCPI compliant commands via RS232. Extensive features such as internal or external AM, FM and FSK modulation along with versatile sweep capabilities and variable edge pulse generation make this generator suitable for a wide range of applications including electronic design, sensor simulation, functional test or generation of I/Q modulated signals.
Features & Benefits:
- 14-bit, 100 MSa/s, 400 k point Arbitrary Waveform Generator
- 25 MHz Sine / 25 MHz Square waveforms
- Predefined Pulse, Ramp, Triangle, Noise, Sin (X)/X, Exponential and Gaussian waveforms
- Both channels offer full functionality. All wave form parameters such as frequency, amplitude and offset can be set independently
- Synchronize both output signals to the same clock signal (external or internal) and precisely adjust the phase relationship between the two signals
- Economical baseband I/Q signal source
- Saves cost and bench space
- AM, FM and FSK modulation
- 10 mVpp to 10 Vpp into 50 ohms
- Large graphical LCD shows a detailed output waveform representation
- Fully programmable markers
- Fully protected output
- Closed case calibration
- Arbitrary waveform editing software included
- SCPI compliant command set
- Datasheet (PDF file)
- Manual (PDF file)
- Product FAQs
- Q: How do I accurately set the phase of the two channels of my Arbitrary Waveform Generator to zero?
A: Display the outputs of the Sync connectors on an oscilloscope and adjust the phase until the leading edges of both signals are in sync. When this is done the phase of the two channels of your Arbitrary Function Generator will be in phase. You can also use a Phase Meter.
Model: CC-21
BNC Breakout to Alligator Clips
Standard BNC to Alligator clips test leads.
- 50 ohm impedance
- RG58C/u cable
- 500Vrms voltage rating
- 40" cable length
MSRP: $11.50
Model: CC510
General Purpose Function Generator Kit
Model CC510 General Purpose Function Generator Kit provides a range of BNC and N Type coaxial interconnection for basic function / arbitrary waveform generators use. All components feature standard BNC or N Type interfaces with 50O impedance and gold plated center contacts to ensure accurate repeatable measurements. The kit is provided in a convenient foam lined storage case for easy selection and use.
Features:
- BNC & N Type 50O Connectors
- Gold plated center contacts
- Storage case
Applications:
- Production Test Stations
- Service & Repair Facilities
- Educational Test Benches
MSRP: $169.00
Model: CC520
Deluxe Function Generator & Counter Kit
Model CC520 Deluxe Function Generator / Counter Kit provides a complete range of coaxial adapters and cables for general-purpose function, signal & arbitrary-waveform generators as well as frequency counters. All kit components feature precision machined bodies, 50O impedance and low VSWR to ensure accurate and repeatable measurements. The kit is provided in a convenient foam lined case for easy component selection and storage.
Features:
- BNC & N Type 50O Connectors
- Deluxe Adapters
- Gold plated center contacts
- Storage case
Applications:
- Production Test Stations
- R&D Labs
- Service & Repair Facilities
- Calibration Services
- RF Field Testing
MSRP: $369.00
Model: LC 40
Function Generator and Arbitrary Waveform Generator Carrying Case
- Made in the U.S.A.
- Light weight, durable Cordura nylon
- Protects your instruments from damage
- Room to hold your test leads
- Perfect size to accommodate bench a Function Generator or Arbitrary Waveform Generator
- Approximate Internal Dimensions: 11 x 5.5 x 12" (279 x 140 x 305mm)
MSRP: $88.00
Model: TLFG
Function Generator Test Leads Set
General purpose test probe set that includes BNC to BNC cables, BNC adapters and test clips.
MSRP: $82.00
| Version |
Note |
File Size |
Date |
File Link |
| V1.61 |
Arbitrary Waveform Creation Software |
1.59 MB |
10/1/2009 |
WaveX |