Home > Products > Signal Generators > Arbitrary Function Generators > Model 4086AWG
80 MHz Function / Arbitrary Generator
Model 4086AWG
MSRP: $1,895.00
1-year warranty
Model 4086AWG is a laboratory grade synthesized function generator with arbitrary capability. Direct digital synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms as well as custom arbitrary waveforms. The 4086AWG produces high purity, low distortion sine waves up to 80 MHz, square waves up to 40 MHz and provides extensive analog modulation capabilities including AM, FM, FSK, PSK, pulse modulation, burst mode and linear/logarithmic sweep combined with multiple trigger modes. The included intuitive Windows Software lets users create and edit custom arbitrary waveforms and download them with a single click to the instrument’s non volatile memory. Unmatched affordability and high performance make the 4086AWG a perfect fit for many applications in Electronic Test and Design, Sensor Simulation and Education and Training.
- Clean and stable output of very small signals down to the 1mV–10mV range (50 ohm)
- Support of internal and external modulation sources as well as internal, external and gated trigger sources
- Create arbitrary waveforms with 10 bit vertical resolution, 16k memory depth and a sample rate of 200 MSa/s
- Seamless import of waveforms from any Tektronix® TDS1000, TDS2000, TPS2000 and TDS3000 series digital storage oscilloscope. Easily recreate waveforms originating from the DSO’s display or internal memory.
- Fully programmable via the standard RS232 interface using SCPI compatible commands.
- 100 MHz Universal Counter with frequency measurement and totalize function
- Datasheet (PDF file)
- Manual (PDF file)
- Product FAQs
- Q: My generator seems to be stuck in a function and I can get back to the initial setting. How do I get out of a set function?
A: Press the Shift button and then press the 0 (SW) button.
- Q: How do I disable the key sound so that it does not beep when I press the keys?
A: The key sound On/Off feature is implemented on newer units. Please check your serial number in the back of the unit and look for something similar to this: 4084013640907XXXX. Check to see if your unit has 0907 as shown in bold. If you do, you have the option to disable the key sound by going into the system menu. Press "shift" + "-" to go into system menu. Then press "menu" a few times until you see "beep" on display. Use the rotary knob and turn left to change it to "1: CLOSE". Upon exiting the menu, the key sound will now be disabled.
- Specifications
Model: TLFG
Function Generator Test Leads Set
General purpose test probe set that includes BNC to BNC cables, BNC adapters and test clips.
MSRP: $82.00
| Version |
Note |
File Size |
Date |
File Link |
| V1.0.6 |
Waveform creation Software |
1.77 MB |
11/2/2007 |
408x |
MSRP: $82.00