Uncategorized

A general purpose 20,000 count bench digital multimeter that measures up to 1,200 VDC

Traditional hand held analog multimeter with 20,000 Ohm per Volt

Auto or manual ranging capacitance meter that measures up to 50,000 uF. The LCD displays both the capacitance value along with the capacitors dissipation factor.

Provides two isolated outputs with selectable combination of output voltages from 90 to 140 VAC with up to 350 VA continuous and two direct outputs that are not isolated

Auto or manual ranging, dual display LCR meter that has selectable test frequencies of 120 Hz or 1 kHz

Auto or manual ranging capacitance meter measures up to 200,000 uF. The LCD displays both the capacitance value along with the capacitors dissipation factor. Interface software and cable included.

Compact value priced bench 8 digit LED display 1.0 GHz Frequency Counter with selectable 0.1 and 1.0 seconds gate times.

Auto or manual ranging, dual display LCR meter that has selectable test frequencies of 100 Hz, 120 Hz, 1 kHz or 10 kHz

Performs Good/Bad tests of transistor, FET's, and small SCR's. It also identifies transistors as NPN or PNP and FETs as N channel or P channel.

A Direct Digital Synthesis Sweep Function Generator that generates stable sine & square waveforms from 0.1 Hz to 7 MHz.

A 50,000 count True RMS dual display bench digital multimeter with an RS-232 interface

Tests and displays if transistors are "good" or "bad". Identifies transistors as NPN or PNP & FETs as N or P channels. Displays leakage current. Distinguishes between Silicon or Germanium transistors.

A Direct Digital Synthesis Sweep Function Generator that generates stable sine & square waveforms from 0.1 Hz to 12 MHz.

25 MHz monochrome, entry level DSO. Easy to use due to analog style knobs and one touch automatic setup. Supports cursors with readouts, 11 automatic measurements and extensive Trigger capabilities.

These bench power supplies have coarse and fine voltage control knobs along with a low and high range current control with dual analog displays to continuously monitor both output current and voltage

These bench power supplies have both coarse and fine voltage and current control knobs and dual LED displays to continuously monitor both output current down to 1 mA and voltage down to 10 mV

A Direct Digital Synthesis Sweep Function Generator that generates all waveforms from 0.01 Hz to 10 MHz. It can be operated by the front controls or via RS232 interface.

40 MHz color DSO featuring cursors with readouts, 11 automatic measurements, extensive Trigger capabilities, one touch automatic setup, FFT function and PC Software for documentation of test results.

A 120,000 count True RMS dual display bench digital multimeter with an RS-232 interface. Has both 2 wire and 4 wire resistive measurement capabilities.

60 MHz color DSO supporting advanced features such as FFT function, digital filtering, waveform recorder, delayed sweep and mask testing. Also includes a front panel USB port for USB flash drives.

Same as the 5492 with the addition of a GPIB interface

60 MHz color DSO supporting advanced features such as FFT function, digital filtering, waveform recorder, delayed sweep and mask testing. Also includes a front panel USB port for USB flash drives.

A power supply with two power ranges of 0 to 17.5 VDC/0 to 6 A or 17.5 to 30 VDC/0 to 3 A with 10 mV/1 mA resolution and includes a GPIB interface

Programmable multifunction instrument featuring a 20 MHz function generator, triple output DC power supply, voltmeter, frequency counter & totalizer and 35 MHz logic probe.

100 MHz color DSO supporting advanced features such as FFT function, digital filtering, waveform recorder, delayed sweep and mask testing. Also includes a front panel USB port for USB flash drives.

Variable switching power supply providing power up to 1.2 kWDC in a 1U, 19 inch rack mountable design with a RS232 interface

Variable switching power supply providing power up to 1.2 kWDC in a 1U, 19 inch rack mountable design with a RS232 interface

Variable switching power supply providing power up to 1.2 kWDC in a 1U, 19 inch rack mountable design with a RS232 interface

Variable switching power supply providing power up to 1.2 kWDC in a 1U, 19 inch rack mountable design with a RS232 interface

The same as the model VSP6020 with the addition of a GPIB interface instead of RS232

The same as the model VSP4030 with the addition of a GPIB interface instead of RS232

The same as the model VSP4030 with the addition of a GPIB interface instead of RS232

The same as the model VSP4030 with the addition of a GPIB interface instead of RS232