DISCONTINUED—150MHz, 1GS/s, Digital Storage Scope, w/RS-232 Interface
B&K Precision
Model 5105B
-
- 100 MHz, 1 GSa/s Digital Storage Oscilloscope
- Model# 2542B
- MSRP $899.00
100 MHz, 1 GSa/s, 2-Ch, color display DSO with features such as deep memory up to 2.4 Mpts, digital filtering, FFT, waveform recorder, and mask testing. Includes LAN and USB port for remote control.
The model 5105B is a 150 MHz (1GS/s) Analog/Digital Storage Oscilloscope (DSO). It is a high performance 150MHz analog oscilloscope with the capability to digitize and store waveforms with its 1GS/s A/D Converters. After the digital acquisition the data can be manipulated and displayed for examination. Unlike other "DSOs" on the market the 5105B is an Analog/Digital model that is not limited by the shortcomings of pure Digital Storage Oscilloscopes.
5105B Features:
- 1GS/s Real time sampling
- Auto set
- Save/recall
- Readout cursors
- Time base 50s to 5ns
- 8-Bit low noise flash A/D converters
- Pre and post trigger - 100% to +400%
- Acquisition modes: Single Event, Refresh, Average, Envelope, Roll, Peak-Detect
- On screen Help information
- RS-232 Interface
Advantages of Analog over Digital:
- Analog scopes display signals in real time
- Analog scopes can catch "rare events" that DSOs can miss due to their sampling rate limitations
- Analog scopes are not limited in vertical resolution by 8 or 12 bit A/D converters that can lose signal details during the digitizing process
- Analog scopes have a frequency response which closely follows the Gaussian curve, this means in practice that frequencies far beyond the
-3dB frequency will be shown. The amplitude will be reduced but they will be shown
Advantages of the added digital operation:
- Capture and storage of single events for event analysis
- There will be no screen flicker with very low frequency signals
- Fast signals with a low repetition rate response and low duty cycle can be displayed with high intensity
-
- Oscilloscope and Spectrum Analyzer Carrying Case
- Model# LC 210A
- Made in the U.S.A.
- Light weight, durable Cordura nylon
- Protects your instruments
- Room to hold your test leads
- Approximate Internal Dimensions: 15 x 7.5 x 17.5" (381x 191 x 445mm)
-
- 150 MHz 1x/10x Oscilloscope Probe
- Model# PR 150
- 25/150MHz Bandwidth
- X1/X10 Attenuation
- 48" (1.2m) Cable length
- Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter.
- IEC61010-2-031


