| Specifications |
model 3001 |
| Frequency Range |
x1 range 20 kHz to 1.5 kHz
(23 steps), x100 range 2 kHz to 150 kHz (23 steps) |
| Accuracy |
20 Hz through 100 kHz (+-3%
or less), 120 kHz and 150 kHz (+-5% or less) |
| Output Control |
0 dB/-20 dB attenuator switch
and variable amplitude control |
| Output impedance |
approx. 600 |
| SINEWAVE CHARACTERISTICS |
| Output Voltage |
> 1.2V rms at max. setting
(no load) |
| Output Flatness |
(Short term) 20 Hz to 150
kHz +-0.5dB (reference frequency 1 kHz) |
| Distortion |
200 Hz - 15 kHz 0.5% (THD)
or less, 50 Hz-28 kHz 0.1% (THD) or less, 20 Hz-100kHz 0.3% (THD) or less |
| SQUARE WAVE
CHARACTERISTICS |
| Output Voltage |
> 5V p-p at maximum setting |
| Rise and Fall Time |
Less than 0.5 microseconds |
| Sag |
Less than 5% at 20 Hz (DC
coupled) |
| Over Shoot |
<2% from maximum output,
to 50mV p-p |
| Duty Ratio |
50% + 5% |
| SYNC OUTPUT
CHARACTERISTICS |
| Output Voltage |
> 1.2 V rms (no load) |
| Output Impedance |
1 k
+ 5% |
| Other specifications
same as sinewave characteristics |
| GENERAL INFORMATION |
| Operating Temperature |
0 0 C to +50
0
C; specifications apply from 10
0 C to 30 0 C, <80%
R.H. |
| Storage Temperature |
-20 0 C to +60
0
C, without battery |
| Power Requirements |
9V battery NEDA 1604A |
| Battery Life |
35 hours typical with Alkaline |
| Battery Indicator |
LED indicates low battery |
| Dimensions (HxWxD) |
6x3.3x0.9'' (150 x82x21mm) |
| Weight |
7 oz. (200g) including battery |
| One Year
Warranty |
| Accessories |
| SUPPLIED: Two
standard banana plug to insulated clip test leads, 9V battery, Instruction
manual. |