B+K Precision

Economical, Compact Switching DC Power Supply with USB Charging Port Provides 1–36 V, 0-3 A Output

B+K Precision Corporation’s model 1550  Switching DC Power Supply is a compact 108 Watt DC power supply delivering 1-36 V and 0-3 A to its main isolated output. Operating as a constant voltage source or as a constant current source, automatic crossover to either mode of operation occurs when the load condition changes. The unique front panel mounted USB 1.1 charging port permits the user to conveniently charge a cell phone or MP3 player.

Priced at a low $139.00 and measuring a compact 2.8” (w) x 6.0” (H) x 9.8” (D),  the  1550’s clean power and quiet operation makes it an ideal power supply for use in offices, laboratories, work shops, and schools where bench space is limited.

Features include:

• USB charging port on front panel*
• Rear panel security loop
• Compact design
• Output ON/OFF control
• Large, bright, easy-to-read display
• Constant voltage and constant current operation
• Over-voltage protection
• Over-temperature protection

* USB 1.1 charging port will not charge products compliant with USB 2.0 only

The model 1550 Switching DC Power Supply with USB charger port is a micro-controller-based DC power supply with USB charger output, constant current operation, over-voltage protection, floating (isolated-from-ground) output terminals, and an output on/off push button. By using the digital plus/minus (+/-) key control on the front panel, the user can easily set the output voltage and current. 

The USB output is rated at 5 VDC and 0.4 A in accordance with the USB 1.1 standard. The user can power up or charge portables such as iPods, MP3 players, or cell phones, rather than having to charge the device by connecting it to a computer’s USB port.

The power supply is designed to operate as a constant voltage source as long as othe load current is less than the preset current-limiting value. When the load current is equal to or greater than the preset current-limiting value, the power supply will automatically cross over to the constant current mode and the voltage will drop. When the current drops below the preset current-limiting value, the supply returns to constant voltage mode.

Priced at $139.00, the model 1550 is available for immediate delivery and comes complete with line cord, user manual, and B+K Precision’s one year warranty.

For the name and location of an authorized distributor near you, contact B&K Precision Corporation, 22820 Savi Ranch Parkway, Yorba Linda, California, 92887, Tel: (714) 921-9095, Fax: (714) 921-6422 or visit our Web site at www.bkprecision.com.

For additional information contact Greg Von Rehder at (714) 921-9095, ext. 230, e-mail: gregv@bkprecision.com or Matthew Stein, (951) 850-1521, e-mail: mstein812@verizon.net (Agency contact).

Dual Channel 40 MHz Digital Storage Oscilloscope With Color Display

B&K Precision Corporation’s new Model 2532 Dual Channel Digital Storage Oscilloscope (DSO) delivers an unmatched combination of performance and value. This versatile bench top unit is a versatile 40 MHz digital oscilloscope with analog-style knobs and controls.  The AUTO button makes this oscilloscope easy to use. Advanced triggering, automatic measurements, and FFT functions provide the user with many tools to debug circuits.

The Model 2532 comes with PC software that can be used to easily capture, save, and analyze waveforms and measurement results. The low price of $699.00 makes it one of the most aggressively-priced scopes on the market today.  It is the ideal oscilloscope for use in education, training, maintenance, manufacturing and quality control.

The Model 2532’s outstanding features include:

• 40 MHz bandwidth, 500 MSa/s sample rate
• Color LCD display
• 4000 point record length for each channel
• One touch automatic setup for ease of use (AUTO button)
• USB device port on back of instrument
• Time and amplitude cursors with readouts
• Eleven automatic measurements
• FFT standard plus four additional math functions
• Extensive triggering capabilities including pulse width and line-selectable video trigger
• Multiple language interface
• Capture, save and analyze waveform data with the included PC software
• Built-in security loop cable channel to secure the scope to its location

Measuring 11.4” wide by 11.8” deep by 5.9” high, the Model 2532 40 MHz Digital Storage Oscilloscope weighs 10 pounds and comes complete with operating manual, 10:1 probe Set (2 pieces), power cord, USB interface cable, and PC software installation disk.  It is priced at $699.00, quantity one, and is available for immediate delivery.

For the name and location of an authorized distributor near you, contact B&K Precision Corporation,22820 Savi Ranch Parkway, Yorba Linda, California, 92887, Tel: (714) 921-9095, Fax: (714) 921-6422 or visit our Web site at www.bkprecision.com.

For additional information, contact Jorg Hesser at (714) 921-9095, e-mail: jhesser@bkprecision.com or Matthew Stein at (951) 850-1521, e-mail: mstein812@verizon.net (Agency Contact).

Full featured 60 MHz Digital Oscilloscope that won’t break your budget

B&K Precision Corporation’s new Model 2534 dual channel Digital Storage Oscilloscope (DSO) delivers an unmatched combination of performance and value. This versatile bench top unit is a high-performance 60 MHz digital oscilloscope with analog-style knobs and controls.  The Auto measurement function makes this oscilloscope easy to use. Advanced triggering, digital filtering, waveform recorder, delayed sweep/zoom, mask testing, automatic measurements, and FFT functions provide the user with many options to debug circuits.

The 2534 comes with PC software that can be used to easily capture, save, and analyze waveforms and measurement results. The low price of $799.00 makes it one of the most aggressively priced scopes on the market today.  It is the ideal oscilloscope for use in education, design, training, field service, maintenance, manufacturing and quality control.

• The Model 2534’s many outstanding features include:
• 60 MHz bandwidth, 400 MSa/s sample rate
• 4000 point record length for each channel
• One touch automatic setup for ease of use (Auto)
• Color LCD display
• USB front panel host port for USB flash drives and USB device interface standard
• Advanced features include digital filter with adjustable limits, mask testing, and waveform recorder/replay mode
• Cursors with readouts
• 24 automatic measurements
• FFT standard plus 3 additional math functions
• Extensive triggering capabilities including pulse width and line-selectable video trigger
• Multiple language interface
• Capture, save and analyze waveform data with the included PC software

Measuring 12.2” wide by 10.6” deep by 5.8” high, the Model 2534 60 MHz Digital Storage Oscilloscope weighs 8 pounds and comes complete with operating manual, 10:1 probe Set (2 pieces), power cord, USB interface cable, and PC software installation disk.  It is priced at $799.00, quantity one, and is available for immediate delivery.

For the name and location of an authorized distributor near you, contact B&K Precision Corporation,22820 Savi Ranch Parkway, Yorba Linda, California, 92887, Tel: (714) 921-9095, Fax: (714) 921-6422 or visit our Web site at www.bkprecision.com.

For additional information, contact Jorg Hesser at (714) 921-9095, e-mail: jhesser@bkprecision.com or Matthew Stein at (951) 850-1521, e-mail: mstein812@verizon.net (Agency Contact).

Attention Editor: To obtain a high resolution image of this product, please go to www.bkprecision.com/hires. The photos are easy to download, just point at the desired image and right click to save to your hard drive or other specified location.

B&K Precision Corporation’s Model 2640 is a battery operated, hand-held RF Field Strength Meter capable of measuring RF levels and electric field strength. The synthesizer-based design provides reliable measurements across a wide reception range of 100KHz to 2000MHz, a remarkably low noise floor of -110 dBm to detect weak signals, and basic spectrum analyzer functionality. Priced at only $2,250.00, the hand-held RF Field Strength Meter is ideal for users to test, install and maintain Mobile Telecommunications Systems, Cellular and Cordless Phone, CB Paging, Paging Systems, Cable and Satellite TV Systems, as well as antenna site measurements and maintenance.

B&K Precision Corporation’s, new AK57X Interface Software with USB Dongle  interfaces the B+K Precision Model 570A Analog and Model 575A Digital Hand Held IC Testers with the CompactLink Functional IC Test Generating Software to permit the easy addition of new ICs to the tester’s libraries. Priced at $625, the software requires an RS-232 or USB (required adaptor included) connection to a PC and runs with Microsoft XP and a USB jack for the Licensing Dongle.

B&K Precision Corporation’s Models 9120A, 9121A, 9122A, 9123A, and 9124, are laboratory grade Single Output Digital DC Power Supplies. The bench top units  provide clean, stable and reliable power and offer a programmable output ranging from 0-32V, 0-3A (Model 9120A) to 0 to 72V, 0 to 1.2A (Model 9124). Pricing begins at a low $709 for the Model 9120A, $715 for the Model 9121A, $739 for the Model 9122A, $799 for the Model 9123A and $715 for the Model 9124. All of the units can be remotely controlled from any PC with USB or RS-232 interface, allowing the user to program and monitor all parameters through easy-to-use SCPI commands. Additionally, the Model 9123A can be controlled via GPIB interface and includes a GPIB to TTL conversion adapter cable.

B&K Precision Corporation’s Model 9110 100W 60V/5A Multi-Range DC Power Supply is a new kind of power supply that differs from conventional power supplies with fixed output ratings. The Model 9110 automatically recalculates the voltage/current limits for each setting and provides 100W output power in any Volt/Amp combination within the rated voltage (60V) and current (5A) limits. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required. Priced at a low $275.00 and measuring a compact 3.47”w x 6.9”h x 11.11”D,  the Model 9110 can be used to free up valuable bench space.

B&K Precision Corporation’s model 4040DDS is a low cost, full-featured, flexible 20 MHz sweep function generator that utilizes Direct Digital Synthesis (DDS) to generate precise and accurate waveforms with little distortion. The model 4040DDS provides 20 MHz sine and square waveforms and 2 MHz triangle waveforms. At a price of only $699.00, this sweep generator is ideal for use in many applications in the engineering, manufacturing, servicing, educational, and hobbyist fields.

The B+K Precision Corporation Models 6010, 6011, 6112 and 6013 High Speed Programmable Attenuators can operate in an attenuation range of 80dB, with a minimum step size of 0.05dB, switching speed of up to 2us, and cover a wide frequency range of 1.5 to 13.5GHz. Attenuation values can be set manually from the front panel, programmed via the standard GPIB or RS-232 interface, or formed with the included Windows-based software by generating an attenuation profile and transferring it to the instrument’s internal memory. Due to their outstanding performance, flexibility, and ease, the 6010 series are ideal for many applications in the field of wireless communications such as CDMA, GSM, wireless LAN, Bluetooth, Electronic Toll Collection (ETC) and RFID.

B&K Precision Corporation’s Model 2652 is a compact, cost-effective, handheld, PC- compatible 3.3GHz Spectrum Analyzer with a tracking generator added, that delivers the performance and features of a full-size bench top spectrum analyzer. Weighing only 4.0 pounds including battery, this small, versatile, easy to use, portable unit is priced at only $6,950 and is ideal tool for engineers and technicians who perform field measurements in the 50KHz to 3.3GHz range.  Advanced synthesizer-based design enables the Model 2652 to provide an accurate and detailed picture of the spectrum being analyzed. The included tracking generator can be used to rapidly determine transmission characteristics of two-port RF devices.