High Speed Data Acquisition System with Printer
Model 8460
MSRP $11,950 / 2 Yr Warranty
Where to Buy- Overview
- Docs & Software
- Accessories & Options
- Fast sampling rate: up to 1 MSa/s (1 μs) on each channel
- Up to 72 channels (with multiplexed board)
- 4 measurement board types; Universal, Multiplexed, Strain Gauge, High Voltage
- Measure up to 1000 VAC with high voltage board
- Temperature measurements supporting thermocouples and Pt100/Pt200/Pt500/Pt1000 sensors
- GPS and IRIG timing options
- 16-bit resolution with multiplexed and strain gauge boards
- 14-bit resolution with universal and high voltage boards
- 500 GB SSD internal memory (2 TB optional)
- 270 mm thermal printer
- 16 logic input channels
- CAT III 1000 V and CAT IV 600 V
- Wide TFT display with 15.4-inch touchscreen
- USB host and LAN
- Free software for control and analysis
-
0.01 Ohm Shunt, 0.5%, 30 A max
Model 207030301
- 0.01 Ohm
- 0.5%
- 50 A
MSRP $375.00
-
0.001 Ohm Shunt, 0.5%, 50 A max
Model 207030500
- 0.001 Ohm
- 0.5%
- 50 A
MSRP $325.00
-
Thermal Paper - Standard
Model 837500504
- 30m roll
- 270mm width
- Standard thermal paper
MSRP $21.44
-
Thermal Paper - Long Life
Model 837500520
- 325m roll
- 270mm width
- This paper is design for long life to preserve records.
MSRP $39.50
-
Thermal Paper - Pre-Cut
Model 837500522
- 30m roll
- 270mm width
- Thermal paper with pre-cut (A4)
MSRP $39.50
-
0.01 Ohm Shunt, 1%, 3 A max
Model 910007100
- 0.01 Ohm
- 1%
- 3 A
- Banana plug
MSRP $150.00
-
0.1 Ohm Shunt, 0.1%, 3 A max
Model 910007200
- 0.1 Ohm
- 1%
- 3 A
- Banana plug
MSRP $150.00
-
10 Ohm Shunt, 0.1%, 0.15 A max
Model 912008000
- 10 ohm
- 0.1%
- 0.15 A
- Banana plug
MSRP $99.00
-
Isolated logic channel module
Model 984405500
- 16 isolated logical channels (250V)
- Direct connection to the SEFRAM recorder
- Compatible with all Sefram recorders
- Power supply for external sensor
- 3 Alarms (output)
- Input with safety bananas or fast connectors
- Supplied with interface cable and fast connectors
MSRP $1,040.00
-
Rackmount Kit for 8460
Model 984604000
MSRP $415.00
-
Rugged Carrying Case for 8460
Model 984605050
MSRP $725.00
-
1 Ohm Shunt, 0.1%, 0.5 A max
Model 989006000
- 1 Ohm
- 0.1%
- 0.5 A
- Banana plug
MSRP $150.00
-
50 Ohm Shunt, 0.5%, 50 A max
Model 989007000
- 50 Ohm
- 0.5%
- 50 A
- Banana plug
MSRP $150.00
-
Flexible Current Clamp
Model A1587
- Diameter : 25 cm
- 3 ranges : 30A/300A/3000A
- Universal plug inputs
MSRP $339.00
-
IRIG Option Factory Installed
Model DAS917005000
MSRP $3,750.00
-
GPS Option Factory Installed
Model DAS917005600
MSRP $3,750.00
-
AC Current Clamp 100 A
Model SP221
- Current clamp 100 A AC
- Output voltage 100 mV/A
- Bandwidth 40 Hz to 5 kHz
- Jaw opening 15 mm
MSRP $190.00
The 8460 high speed, configurable data acquisition system combines a fast sampling rate, deep memory, a thermal printer, and a large touchscreen display. Internal software tools are also provided like the power analysis application and a function editor for complex mathematical calculations on multiple channels.
The built-in printer provides a permanent record of the data with date and time stamp. The printer operates in four modes. The fastest is direct mode, which prints to paper only, mixed-mode prints to paper while saving the data to internal memory. External control mode starts and stops the printing with a logic signal, and transcription mode prints data previously stored in memory.
These recorders feature a 1 µs sampling rate on up to 6 channels simultaneously while the 500 GB internal memory allows for recording over long periods. Data is acquired from 4 measurement board types which include universal input, multiplexed, strain gauge, and high voltage.
Choose any combination of 3 boards for applications ranging from small sensor signal logging to electrical power analysis.
Consider the DAS1700 if a printer is not necessary.
Base Units | Measurement Boards | |||||
Mainframe | Mainframe | Universal | High Voltage | Multiplexed | Strain Gauge | |
Model | DAS1700 | 8460 | DAS984401000 | DAS916006000 | DAS984402000 | DAS984402500 |
Channels | - | - | 6 | 6 | 12 | 6 |
Maximum Voltage | - | - | ± 500 V or 424 VRMS | ± 1000 V or 1000 VRMS | ± 25 VDC | ± 25 VDC |
RMS Voltage | - | - | √ | √ | - | - |
Resolution | - | - | 14 bit | 14 bit | 16 bit | 16 bit |
Sampling Rate | - | - | 1 MSa/s | 1 MSa/s | 5 kSa/s | 100 kSa/s |
Voltage | - | - | √ | √ | √ | √ |
Current | - | - | √ | √ | √ | - |
Frequency | - | - | √ | √ | - | - |
Thermocouple | - | - | √ | - | √ | √ |
Counter | - | - | √ | √ | - | - |
Power Analysis | - | - | √ | √ | - | - |
PRT Sensor | - | - | - | - | Pt100/Pt200/Pt500/Pt1000 | Pt100/Pt1000 |
Options | Ordering Information | |||||
Mainframe Extension | Optional* | - | Base unit must be ordered with at least one measurement board | |||
Battery | Optional | - | ||||
IRIG | Optional | Optional | ||||
GPS | Optional | Optional | Options are factory installed and must be ordered with base unit. | |||
CAN/LIN | Optional | - | ||||
Printer | - | Standard |
* Up to 72 channels with multiplexed boards
Documentation
Software
Description | Version | Download |
---|---|---|
Sefram Pilot for DAS1700 | 1.1 | InstallPilotSeframV1.1.zip |
Display and view recorded data | 3.0 | SeframViewer.zip |