2550 Series
70 MHz to 300 MHz, 2 GSa/s Digital Storage Oscilloscopes
Discontinued Model 2554
Discontinued: January 9, 2017 MSRP $1,170 / 3 Yr Warranty
The 2550 series digital storage oscilloscopes deliver performance and value in 2-channel and 4-channel configurations. With bandwidth from 70 MHz to 300 MHz and 2 GSa/s sample rates, these oscilloscopes offer 24 kpts/Ch waveform memory, 32 automatic measurements, and advanced triggering capabilities including math functions. Engineered to allow you to see more of your signal under test, the 2550 series’ widescreen 7” TFT display offers a significantly larger viewing area than typical economy oscilloscopes (5.7”).
- Bandwidth up to 300 MHz
- 2 GSa/s sample rate
- 4-channel acquisition (on select models)
- Large 7" widescreen color display
- 32 automatic measurements
- FFT plus four additional math functions
- Built-in context sensitive help system
- 50 Ω input coupling
- PC software that lets you remotely control the oscilloscope and capture, save, and analyze waveform data
- Front and rear panel USB host port for convenient storing and recalling of waveform data, setups, and screenshots on a USB flash drive
- Standard LAN (supports SCPI) and USB device port (USBTMC compliant) for remote PC control
Download waveforms from B&K oscilloscopes, AWGs, or load them from CSV/text files.
Documentation
Software
Description | Version | Download |
---|---|---|
LabVIEW 2011 Drivers | 1.0.0 | LV2011_255X.zip |
LabVIEW 2014 SP1 Drivers | 1.0.0 | LV255X.zip |
Operating Software (Windows 7/8.1/10) | 1.02.01.18 | Operating_scope_software.zip |
USBTMC Driver Installation Note | 1.0 | USBTMC_Driver_Readme.txt |
Operating Software (Supports Windows(R) 7/8.1/10) | 11April2017 | WaveXpress.zip |
-
USB-to-GPIB Adapter
Model AK40G
The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.
- Powered through USB host connector
- Cable length approximately 56 inches (143cm)
- Communication Status LED and Power LED indicators
- GPIB interface supports Device mode only (not Controller mode)
MSRP $208.00
-
General Purpose Signal Interconnect Kit
Model CC510
Model CC510 General Purpose Function Generator and Oscilloscope Kit provides a range of BNC and N Type coaxial interconnection for basic function / arbitrary waveform generators use. All components feature standard BNC or N Type interfaces with 50 ohm impedance and gold plated center contacts to ensure accurate repeatable measurements. The kit is provided in a convenient foam lined storage case for easy selection and use. Features: BNC & N Type 50 ohm Connectors Gold plated center contacts Storage case Applications: Production Test Stations Service & Repair Facilities Educational Test Benches
MSRP $209.00
-
High-Voltage Oscilloscope Probe, 10 kV, 40 MHz
Model PR-55
If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.
- X1000 Attenuation
- 100 Mohms / 1 pF Input Impedance
- Up to 40 MHz Bandwidth
- 80" (2.0m) Cable Length
MSRP $333.00
-
25 MHz Active Differential Probe
Model PR-60
General Purpose digital storage oscilloscope active differential probe with 10x and 100x attenuation ranges and voltage measurements up to ±700 V. Bandwidth to 25 MHz. Powered by 4 AA batteries or optional 6 V DC mains adapter.
Applications include:
- Switching power supply designs
- Motor drive design
- Electronic ballast design
- CRT display design
Features:
- Up to ±700 V differential and common mode
- 25 MHz bandwidth (-3 dB)
- Safety certified
- Accessories: Spring loaded hook probes, 4 AA batteries, rubber boot & manual
- Reference SI-9001
MSRP $417.00
-
150 MHz 1x/10x Oscilloscope Probe
Model PR150B
- 17/150 MHz Bandwidth
- X1/X10 Attenuation
- 47" (1.2m) Cable length
- 300 V CAT II
- Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter
- Meets IEC61010-031 CATII
MSRP $56.00
-
200 MHz 2 kV Oscilloscope High Voltage Probe
Model PR2000B
If the voltages you need to measure are above the specifications of the general purpose probe, B&K Precision has higher voltage probes for you.
- X100 Attenuation
- 100 Mohms / 5 pF Input Impedance
- 200 MHz Bandwidth
- 48" (1.2m) Cable Length
MSRP $113.00