2550 Series

70 MHz to 300 MHz, 2 GSa/s Digital Storage Oscilloscopes

Model 2553

MSRP $1,435 / 3 Yr Warranty
Where to Buy

The 2550 series digital storage oscilloscopes deliver performance and value in 2-channel and 4-channel configurations. With bandwidth from 70 MHz to 300 MHz and 2 GSa/s sample rates, these oscilloscopes offer 24 kpts/Ch waveform memory, 32 automatic measurements, and advanced triggering capabilities including math functions. Engineered to allow you to see more of your signal under test, the 2550 series’ widescreen 7” TFT display offers a significantly larger viewing area than typical economy oscilloscopes (5.7”).

  • Bandwidth up to 300 MHz
  • 2 GSa/s sample rate
  • 4-channel acquisition (on select models)
  • Large 7" widescreen color display
  • 32 automatic measurements
  • FFT plus four additional math functions
  • Built-in context sensitive help system
  • 50 Ω input coupling
  • PC software that lets you remotely control the oscilloscope and capture, save, and analyze waveform data
  • Front and rear panel USB host port for convenient storing and recalling of waveform data, setups, and screenshots on a USB flash drive
  • Standard LAN (supports SCPI) and USB device port (USBTMC compliant) for remote PC control 

WaveXpress Compatible Instrument Download waveforms from B&K oscilloscopes, AWGs, or load them from CSV/text files.

Model Bandwidth Channels MSRP
2553 70 MHz 4 $1,435
2555 100 MHz 4 $1,670



Description Version Download
LabVIEW 2011 Drivers 1.0.0 LV2011_255X.zip
LabVIEW 2014 SP1 Drivers 1.0.0 LV255X.zip
Operating Software (Windows 7/8.1/10) Operating_scope_software.zip
USBTMC Driver Installation Note 1.0 USBTMC_Driver_Readme.txt
Operating Software (Supports Windows(R) 7/8.1/10) 11April2017 WaveXpress.zip
  • USB-to-GPIB Adapter

    Model AK40G

    The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.

    • Powered through USB host connector
    • Cable length approximately 56 inches (143cm)
    • Communication Status LED and Power LED indicators
    • GPIB interface supports Device mode only (not Controller mode)

    MSRP $221.00

  • General Purpose BNC and N Adapter Kit

    Model CC500

    General Purpose BNC & N Type Adapter Kit provides a comprehensive range of in-series and between-series BNC and N Type coaxial adapters for basic RF testing and troubleshooting needs. The 12 piece kit, packaged in a convenient foam-lined storage case for easy selection and use, is ideal for all popular instruments. The kit contains the most commonly used BNC and N Type adapters for everyday testing. All components feature 50Ω impedance, gold plated center contacts, and low VSWR to ensure accurate repeatable measurements. Features: BNC & N Type 50Ω Connectors Gold plated center contacts Storage case Applications: Production Testing Stations Service & Repair Facilities Educational Test Benches

    MSRP $142.00

  • 300 kHz AC/DC Oscilloscope Current Clamp Probe

    Model CP62

    The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.

    • 50 mA to 100 A peak
    • DC to 300 kHz
    CP62 Manual

    MSRP $529.00

  • High-Voltage Oscilloscope Probe, 10 kV, 40 MHz

    Model PR-55

    If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.

    • X1000 Attenuation
    • 100 Mohms / 1 pF Input Impedance
    • Up to 40 MHz Bandwidth
    • 80" (2.0m) Cable Length


    MSRP $368.00

  • 150 MHz 1x/10x Oscilloscope Probe

    Model PR150B
    • 17/150 MHz Bandwidth
    • X1/X10 Attenuation
    • 47" (1.2m) Cable length
    • 300 V CAT II
    • Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter
    • Meets IEC61010-031 CATII

    PR150B Manual

    MSRP $62.00

  • 200 MHz 2 kV Oscilloscope High Voltage Probe

    Model PR2000B

    If the voltages you need to measure are above the specifications of the general purpose probe, B&K Precision has higher voltage probes for you.

    • X100 Attenuation
    • 100 Mohms / 5 pF Input Impedance
    • 200 MHz Bandwidth
    • 48" (1.2m) Cable Length

    PR2000B Manual

    MSRP $121.00