Model 2558

The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.

• Powered through USB host connector
• Cable length approximately 56 inches (143cm)
• Communication Status LED and Power LED indicators
• GPIB interface supports Device mode only (not Controller mode)

General Purpose BNC & N Type Adapter Kit provides a comprehensive range of in-series and between-series BNC and N Type coaxial adapters for basic RF testing and troubleshooting needs. The 12 piece kit, packaged in a convenient foam-lined storage case for easy selection and use, is ideal for all popular instruments. The kit contains the most commonly used BNC and N Type adapters for everyday testing. All components feature 50Ω impedance, gold plated center contacts, and low VSWR to ensure accurate repeatable measurements. Features: BNC & N Type 50Ω Connectors Gold plated center contacts Storage case Applications: Production Testing Stations Service & Repair Facilities Educational Test Benches

Model CC510 General Purpose Function Generator and Oscilloscope Kit provides a range of BNC and N Type coaxial interconnection for basic function / arbitrary waveform generators use. All components feature standard BNC or N Type interfaces with 50 ohm impedance and gold plated center contacts to ensure accurate repeatable measurements. The kit is provided in a convenient foam lined storage case for easy selection and use. Features: BNC & N Type 50 ohm Connectors Gold plated center contacts Storage case Applications: Production Test Stations Service & Repair Facilities Educational Test Benches

The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.

• 50 mA to 100 A peak
• DC to 300 kHz

Usable with most oscilloscopes. Features light weight design and 48" (1.2m) coaxial cable. 100KHz to 950MHz Bandwidth +3dB Accuracy 200V Max input voltage 50VeffHF Voltage 250mV Actuating voltage 5pF Input capacitance Cable Length: 1.2 meters

If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.

• X1000 Attenuation
• 100 Mohms / 1 pF Input Impedance
• Up to 40 MHz Bandwidth
• 80" (2.0m) Cable Length

Manual

General Purpose digital storage oscilloscope active differential probe with 10x and 100x attenuation ranges and voltage measurements up to ±700 V. Bandwidth to 25 MHz.  Powered by 4 AA batteries or optional 6 V DC mains adapter.

Applications include:

• Switching power supply designs
• Motor drive design
• Electronic ballast design
• CRT display design

Features:

• Up to ±700 V differential and common mode
• 25 MHz bandwidth (-3 dB)
• Safety certified
• Accessories: Spring loaded hook probes, 4 AA batteries, rubber boot & manual
• Reference SI-9001

PR-60 Manual

• 17/150 MHz Bandwidth
• X1/X10 Attenuation
• 47" (1.2m) Cable length
• 300 V CAT II
• Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter
• Meets IEC61010-031 CATII

PR150B Manual

If the voltages you need to measure are above the specifications of the general purpose probe, B&K Precision has higher voltage probes for you.

• X100 Attenuation
• 100 Mohms / 5 pF Input Impedance
• 200 MHz Bandwidth
• 48" (1.2m) Cable Length

PR2000B Manual

• 250 MHz Bandwidth
• X10 Attenuation
• 48" (1.2m) Cable length
• Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter
• Meets IEC61010-031 CATII

PR250B Manual