9150 Series
Programmable DC Power Supplies
Model 9152
MSRP $1,985 / 3 Yr Warranty
The 9150 series are high performance linear-regulated programmable DC power supplies that provides excellent performance and features not found in other supplies in this price category. These supplies are designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.
- Very low ripple and noise due to linear regulation
- Excellent display resolution
- Fast transient response time (<120 µs)
- SCPI compatible
- Communicate via USB Interface, using included USB to TTL serial converter cable
- Closed case calibration
- List mode operation for increased throughput
- Very quiet due to intelligent fan speed control
- For bench use or rack mountable
- Application Software for front panel emulation and simple test sequence generation included
- Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
- Over voltage protection
- Digital Volt Meter and Milliohm Meter
Documentation
Software
| Description | Version | Download |
|---|---|---|
| IT-E132 and IT-E132B USB Cable Adapter Driver | v1.14.0 | ITE132(B)_driver.zip |
| NI Certified LabVIEW 7.1 Driver | V1.0 | LV91xx.zip |
| NI LabVIEW 2014 driver | 1.0.1 | LV91XX_2014.zip |
| Operating Software (Supports Windows(R) 7) | V3.3 | PV9100.zip |
-
RS232 to TTL Interface Kit
Model IT-E131B
This is the RS232 to TTL interface kit includes both the RS232 to TTL adapter and a RS232 DB9 to DB9 cable.
MSRP $55.00
-
USB to TTL Interface
Model IT-E132B
This is the USB to TTL interface replacement part that was originally included with its paired product. A standard USB cable is included.
MSRP $51.00
-
Rack mount kit for select models
Model IT-E151
The IT-E151 is for rack mounting of compatible products in either a side-by-side configuration or single unit configuration where a provided blank is used to fill the empty space. The dimensions for the kit are 5.24" (133mm) by 19" (482.6mm).
Compatible models:
- 1785B Series
- 9120A Series
- 9150 Series
- 9200 Series
- 9130B Series
- 8500
- 8502
- 8510
- 8512
- 8514
- 8518
- 8600
- 8601
- 8602
- 891
- 9801
MSRP $81.00
-
High current premium test lead accessory
Model TLPWR1
High quality red and black cable with externally braided wrap with large fork-type spade connectors for connecting to high current power supplies or DC loads.
- Length: 2 m
- Rated current: 60 A
- Gauge: 8 AWG
- Connector inner diameter: 8 mm (approximate)
- Connector outer width: 15 mm (approximate)
- Wire material: flexible silicon jacket
MSRP $93.00
-
100 cm Premium Spade Connector Test Lead Set
Model TLPWR31
High quality red and black cable dual diameter spade connectors for connecting to power supplies or DC loads.
- Length: 1 meter
- Rated current: 30 A
- Connectors: 6/4 mm Spade lug
- Wire material: flexible silicon jacket
MSRP $43.00
-
200 cm Premium Spade Connector Test Lead Set
Model TLPWR32
High quality red and black cable dual diameter spade connectors for connecting to power supplies or DC loads.
- Length: 2 meter
- Rated current: 30 A
- Connectors: 6/4 mm Spade lug
- Wire material: flexible silicon jacket
MSRP $54.00
