4050B Series

Dual Channel Function/Arbitrary Waveform Generators

Model 4054B

MSRP $769 / 3 Yr Warranty
Where to Buy

The 4050B Series Dual Channel Function/Arbitrary Waveform Generators are capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. With an easy-to-read color display and intuitive user interface with numeric keypad, these instruments offer plenty of features including linear/logarithmic sweep, built-in counter, extensive modulation and triggering capabilities, a continuously variable DC offset, and a high performance 14-bit, 150 MSa/s arbitrary waveform generator. CH1 and CH2 outputs can both be varied from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit).

  • 14-bit, 150 MSa/s, 16k point arbitrary waveform generator
  • Two independent channels with individual output On/Off buttons
  • Convenient channel copy, track and combine functions
  • Synchronize the phase of both channels with the push of a button
  • Low-jitter square wave generation for simulating reliable clock signals, generating triggers, or validating serial data buses
  • Large 4.3-inch LCD color display
  • AM/DSB-AM/ASK/FM/FSK/PM/PSK/PWM modulation functions
  • Variable DC offset and adjustable duty cycle
  • Internal/external triggering
  • Gate and burst mode
  • 196 built-in predefined arbitrary waveforms
  • Built-in frequency counter
  • Harmonics generator function
  • LAN, USB device port (USBTMC-compliant), and front panel USB host port
  • GPIB connectivity with optional USB-to-GPIB adapter
  • PC software provided for arbitrary waveform editing
  • Short circuit output protection
Model Sine & Square frequency range MSRP
4053B 1 µHz - 10 MHz $659 Where to Buy
4054B 1 µHz - 30 MHz $769 Where to Buy
4055B 1 µHz - 60 MHz $965 Where to Buy

Documentation

Software

Description Version Download
Operating Software (Supports Windows(R) 7) 1.1.1.36 4050B_Series_software.zip
LabVIEW 2016 Drivers 1.0.0 LV4050B.zip
USBTMC Driver Installation Note 1.0 USBTMC_Driver_Readme.txt
  • USB-to-GPIB Adapter

    USB-to-GPIB Adapter

    Model AK40G

    The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.

    • Powered through USB host connector
    • Cable length approximately 56 inches (143cm)
    • Communication Status LED and Power LED indicators
    • GPIB interface supports Device mode only (not Controller mode)

    MSRP $208.00

  • BNC Breakout to Alligator Clips

    BNC Breakout to Alligator Clips

    Model CC-21

    Standard BNC to Alligator clips test leads.

    • 50 ohm impedance
    • RG58C/u cable
    • 500Vrms voltage rating
    • 40" cable length

    MSRP $12.00

  • General Purpose Signal Interconnect Kit

    General Purpose Signal Interconnect Kit

    Model CC510

    Model CC510 General Purpose Function Generator and Oscilloscope Kit provides a range of BNC and N Type coaxial interconnection for basic function / arbitrary waveform generators use. All components feature standard BNC or N Type interfaces with 50 ohm impedance and gold plated center contacts to ensure accurate repeatable measurements. The kit is provided in a convenient foam lined storage case for easy selection and use. Features: BNC & N Type 50 ohm Connectors Gold plated center contacts Storage case Applications: Production Test Stations Service & Repair Facilities Educational Test Benches

    MSRP $209.00

  • Function Generator Test Leads Set

    Function Generator Test Leads Set

    Model TLFG

    General purpose test probe set that includes BNC to BNC cables, BNC adapters and test clips.

    MSRP $93.00