4060 Series

Dual Channel Function/Arbitrary Waveform Generators

Model 4065

MSRP $1,999 / 3 Yr Warranty
Where to Buy

The 4060 Series Dual Channel Function/Arbitrary Waveform Generators are capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. With an easy-to-read color display and intuitive user interface with numeric keypad, these instruments offer plenty of features including linear/logarithmic sweep, built-in counter, extensive modulation and triggering capabilities, a continuously variable DC offset, and a high performance 14-bit, 500 MSa/s arbitrary waveform generator.

  • 14-bit, 500 MSa/s, 512k point arbitrary waveform generator
  • Two independent channels with one button synchronization
  • Large 4.3-inch LCD color display
  • Linear and logarithmic sweep
  • AM/DSB-AM/ASK/FM/FSK/PM/PWM modulation functions
  • Variable DC offset
  • Highly adjustable pulse duty cycle from 0.0001% to 99.9999%
  • Internal/external triggering
  • Gate and burst mode
  • 36 built-in predefined arbitrary waveforms
  • Store/recall up to 10 instrument settings and 32 user-defined arbitrary waveforms
  • Built-in counter
  • USB device port (USBTMC-compliant) with front panel USB host port
  • GPIB connectivity with optional USB-to-GPIB adapter (model AK40G)
  • Short circuit output protection
  • LabVIEW drivers available

WaveXpress Compatible Instrument

Model Sine frequency range Square frequency range MSRP
4063 80 MHz 40 MHz $1,260 Where to Buy
4064 120 MHz 50 MHz $1,685 Where to Buy
4065 160 MHz 50 MHz $1,999 Where to Buy

Documentation

Software

Description Version Download
LabVIEW 2013 SP1 Drivers 1.0.1 LV4050_4060_Series.zip
USBTMC Driver Installation Note 1.0 USBTMC_Driver_Readme.txt
Generator Operating Software (Windows 7/8.1/10) 1.1.1.36 Waveform_generator_software.zip
Operating Software (Supports Windows(R) 7/8.1/10) 4Nov2014 WaveXpress.zip
  • USB-to-GPIB Adapter

    USB-to-GPIB Adapter

    Model AK40G

    The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.

    • Powered through USB host connector
    • Cable length approximately 56 inches (143cm)
    • Communication Status LED and Power LED indicators
    • GPIB interface supports Device mode only (not Controller mode)

    MSRP $204.00

  • BNC Breakout to Alligator Clips

    BNC Breakout to Alligator Clips

    Model CC-21

    Standard BNC to Alligator clips test leads.

    • 50 ohm impedance
    • RG58C/u cable
    • 500Vrms voltage rating
    • 40" cable length

    MSRP $12.00

  • General Purpose Signal Interconnect Kit

    General Purpose Signal Interconnect Kit

    Model CC510

    Model CC510 General Purpose Function Generator and Oscilloscope Kit provides a range of BNC and N Type coaxial interconnection for basic function / arbitrary waveform generators use. All components feature standard BNC or N Type interfaces with 50 ohm impedance and gold plated center contacts to ensure accurate repeatable measurements. The kit is provided in a convenient foam lined storage case for easy selection and use. Features: BNC & N Type 50 ohm Connectors Gold plated center contacts Storage case Applications: Production Test Stations Service & Repair Facilities Educational Test Benches

    MSRP $195.00

  • Function Generator Test Leads Set

    Function Generator Test Leads Set

    Model TLFG

    General purpose test probe set that includes BNC to BNC cables, BNC adapters and test clips.

    MSRP $91.00