On Time in Program Sequence Mode is not correct on my 9170/9180 series Power Supply
2019-12-23
Problem:
Using the program sequence mode built-in to the 9170/9180 series DC power supply, the timings that I configured for each steps' "On Time" period is not correct when measured with an oscilloscope.
Solution:
This problem is corrected in Main firmware version 2.02 or above and Module version 1.17 and above. To correct this, please update the firmware of your device, which requires a Windows XP or 7 OS PC computer with a USB connection.
Download the firmware files here, and follow the included PDF instructions step by step to update both Main and Module firmware of the power supply.
https://www.bkprecision.com/downloads/9170_9180_Firmware_Update.zip
Featured Products:
9171
Dual Range DC Power Supply 0-10V, 10A / 0-20V, 5A
9172
Dual Range DC Power Supply 0-35V, 3A / 0-70V, 1.5A
9173
Two Channel Dual Range DC Power Supply 0-10V, 10A / 0-20V, 5A
9174
Two Channel Dual Range DC Power Supply 0-35V, 3A / 0-70V, 1.5A
9181
Dual Range DC Power Supply 0-18V, 8A / 0-36V, 4A
9182
Dual Range DC Power Supply 0-10V, 20A / 0-20V, 10A
9183
Dual Range DC Power Supply 0-35V, 6A / 0-70V, 3A
9184
Dual Range DC Power Supply 0-100V, 2A / 0-200V, 1A
9185
Dual Range DC Power Supply 0-400V, 0.5A / 0-600V, 0.35A