模型 390B

AC/DC Clamp Accessory for DMMs

CP 3

• Converts any DMM to a current clamp
• Measures current without disconnecting circuit under test
• Measures to 400A DC/AC
• Outputs 1mV per Amp, operates on 2V range of any DMM

40kV High Voltage DMM Probe

PR 28A

If the voltages you need to measure are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.

• 40,000VDC or 20,000Vac Max input voltage
• X1000 Attenuation
• 1000M ohms Input Impedance
• 60Hz Bandwidth
• 48" (1.2m) Cable Length

PR 28A Manual

Red and Black CAT III (IV) 1000V (600V) Test Leads

TL37

Right-angled sheathed banana replacement 10A test leads for digital multimeters.

High Performance Bench DMM Accessory Kit

TL500B

This kit of accessories was assembled to facilitate requirements by high-performance bench digital multimeters (DMM's) users. All the most popular accessories in one kit. The kit offers MiniProbe test probe, with spring-loaded tips, for fine probing; MiniPRO Test Clips for small and MiniFlex Test Clips for micro connections; and for those larger test points, both spade lug and banana plug adapters, two pairs of test leads for 4-wire measurements or calibration hookups, an insulated BNC male to sheathed banana jack adapter, and an insulated SMD Tweezer set for surface-mount component testing.

• Silicone jacketed test lead wire with UL Listing
• MiniProbes w/Spring loaded Stainless Steel Tips
• Packaged in Plastic Case

Kit Contains:
(4) Test Lead 4mm Sheathed P-RaP Silicon 0.75,  40": (2) Black, (2) Red
(2) Spring Tip Mini-Probe-4mm Jack: (1) Black, (1) Red
(1) Insulated BNC male Adapt-4mm Safety Jacks
(2) Adapter 4mm Banana Plug to Jack: (1) Black, (1) Red
(2) Mini Flex Clip-4mm Jack-Silicon 0.40, 10 cm: (1) Black, (1) Red
(2) Adapter 6mm Spade 4mm-Jack: (1) Black, (1) Red
(2) Lead minipro-J-PVC 0.40, 10 cm: (1) Black, (1) Red
(1) Tweezer Test Lead Set- 4mm P, w/PVC pouch

Specifications

Maxi-Pro DMM Kit

TL50B

• Complete accessory kit for all your testing needs.
• Includes soft, flexible silicone lead wire easy movement and Tri-Fold Velcro Pouch for convenient storage.
• 1000 V, CAT III (600 V, CAT IV)
• UL Listed test leads
• Silicone lead wire length 60" (1.5m)
• Tri-fold Velcro Pouch

Current transducer (10 mVAC/1 AAC, 200 A, Ø 15 mm)

SP201

• Jaw opening 15 mm
• Current transducer 200A AC
• Output voltage 10mV AC/1A AC
• Bandwidth 40 Hz to 5 KHz
• Safety : for isolated conductor only

Current transducer (1VDC/10AAC, 25 A, Ø 15 mm)

SP205

• Jaw opening 15 mm
• Transducer clamp with DC output voltage 25A AC
• Out put voltage 1V DC / 10A AC
• Bandwidth 40 Hz to 5 KHz
• Safety : for isolated conductor only

Current transducer (1VDC/100AAC, 250 A, Ø 50 mm)

SP215

• Jaw opening 50 mm
• Transducer clamp with DC output voltage 250A AC
• Out put voltage 1V DC / 100A AC
• Bandwidth 40 Hz to 5 KHz
• Safety : for isolated conductor only

Current transducer (1 VAC/1 AAC, 5 A, Ø 15 mm)

SP220

• Jaw opening 15 mm
• Current transducer 5A AC
• Out put voltage 1V AC/1A AC
• Bandwidth 40 Hz to 50 Hz
• Safety : for isolated conductor only

Current transducer (100 mVAC/1 AAC, 10A, Ø 15 mm)

SP221

• Jaw opening 15 mm
• Current transducer 10A AC
• Output voltage 100mV AC/1A AC
• Bandwidth 40 Hz to 5 KHz
• Safety : for isolated conductor only

Current transducer (1 mVDC/ 1AAC, 1200 A, Ø 50 mm)

SP240

• Jaw opening 50 mm
• Transducer clamp with Dc output voltage 1200A
• Out put voltage 1mV DC / 1 A
• Bandwidth 40 Hz to 5 KHz
• Safety : for isolated conductor only

Current transducer (1 mVAC+DC/ 1AAC+DC, 1200 A, Ø 50 mm)

SP261

• Jaw opening 50 mm
• Current transducer 1200A
• Output voltage 1mV/1A
• Bandwidth DC A 3KHz
• Safety : 600 V CAT III

Current transducer (1 mVAC/1 AAC, 2000 A, Ø 70 mm)

SP270

• Current transducer up to 2000 A
• Output voltage 1mV AC / 1A AC
• Bandwidth 40 Hz to 5 KHz
• Jaw opening 70 mm
• Safety : 600 V CAT III

Right angle banana plug test lead set (4mm)

SA101

• Included with all our multimeters and clamp meters 
• 2mm and 4mm test probe
• Length: 1,20m
• Max current: 12A
• Set of 1 red and 1 black
• Safety: CAT III - 1000V and CAT IV - 600V

Patch cord set with straight fixed banana plug

SA105

• 4mm safety banana
• Length: 1m
• Max current: 12A
• Set of 1 red and 1 black
• Safety: CAT IV - 1000V

Right angle banana plug to straight fixed banana plug

SA106

• 4mm safety banana
• Length: 1m
• Max current: 12A
• Set of 1 red and 1 black
• Safety: CAT III - 1000V and CAT IV - 600V

Alligator clip set (4mm)

SA110

• 1 alligator clip red and 1 black
• 4mm safety connetion
• 20A max current
• Safety: CAT III - 1000V and CAT IV - 600V

Test probes set

SA115

• 1 test probe red and 1 black
• 36A max current
• Safety: CAT III - 1000V and CAT IV - 600V

Maxigrabber set

SA120

• 1 maxibrabber red and 1 black
• High quality flexible test clip
• 6A max current
• Safety: CAT II - 1000V and CAT III - 600V

Straight fixed banana plug test leads (2mm tip)

SA150

• 1.2m length
• 2mm test probe
• 4mm safety banana plug (instrument side)
• PVC cable
• Max current: 12A
• Set of 1 black, 1 red
• Safety: 1000V CAT IV according to new IEC61010-031:2008

Safety test probes kit with 2mm tip

SA155

• Set of test probes (1 red, 1 black) with 2mm tip
• Max current: 16A
• To be used with 4mm male test lead (SA105 recommended)
• Safety: CAT IV - 1000V

IP2X test leads set with right angle safety banana

SA158

• IP2X test probes with 4mm tips
• Length: 1.2m
• PVC cable
• Max current: 12A
• Test probes with retractable and lockable sleeves
• Set of 1 red, 1 black
• Safety: 600V CAT IV and 1000V CAT III according to new IEC61010-031:2008

Pouch for multimeter

SC503

Protective carrying case for multimeters. Robust and equipped with a zipper, it protects your measuring equipment.