模型 5493CGPIB
5½ 位元桌上型數位萬用電表
6 1/2 Bench Digital Multimeter with GPIB
价格: $1390 / 3 年保修
| Name | Qty | Last Updated | ||
|---|---|---|---|---|
| RS Europe | 1 | 2026-07-10 | ||
| DIGI-KEY | 17 | 2026-07-10 | ||
| TESTEQUITY | 1 | 2026-07-10 | ||
| SEFRAM | 1 | 2026-07-10 |
概述
5490C 系列 5½ 位元和 6½ 位元桌上型萬用電表專為高精度、高重複性和易用性而設計。其寬廣的測量範圍、高達每秒 1000 次的測量速度以及高達 35 ppm 的基本直流電壓精度，可快速、準確地提供穩定的測量結果。這些通用型萬用電錶非常適合要求嚴苛的工程、生產和服務應用。
直覺的 4.3 吋液晶顯示器提供多種測量顯示模式，包括數值顯示、長條圖、趨勢圖和直方圖。內建的數學函數、統計顯示和雙測量功能，為擷取和分析測量資料提供了便捷的方式。
- 12種測量功能：直流電壓 (DCV)、交流電壓 (ACV)、直流電流 (DCI)、交流電流 (ACI)、兩線和四線電阻、電容、頻率、二極體、溫度、通斷測試、直流電壓比
- 4.3吋高對比度全彩液晶顯示屏
- 測量速度高達1000次/秒
- 直流電壓基本精度高達35 ppm (0.0035%)
- 直方圖、長條圖、趨勢圖和數值顯示選項
- 同時顯示最小值、最大值、峰峰值、平均值和標準差統計數據
- 零位元、dB、dBm、%、mx+b 和運行/停止數學運算功能
- 交流頻率測量範圍高達1MHz
- 內部儲存緩衝區，最多可儲存10,000個讀數
- 兩線和四線電阻測量範圍低至10 Ω
- 雙測量顯示
- 後部輸入端子，用於機架式安裝（僅限6.5位元型號）
- 標準USB（符合USBTMC標準）、LAN和RS232接口，支援SCPI指令。 GPIB介面
- 前面板USB主機端口，用於導出測量數據、螢幕截圖以及保存/調用設置
- 包含LabVIEW™驅動程式和作業系統，用於遠端儀器控制、測量監控和數據記錄
楷模
| 产品 | Display Count | Ranging | Correction Factor | 界面 | 价格 |
|---|
Documents
文檔
軟件
|
描述 |
版本 |
下載 |
|---|---|---|
|
Operating Software (No Run-Time)
|
1.0.1
|
|
|
Operating Software
|
1.0.1
|
|
|
LabVIEW 2020 Driver
|
1.0.0
|
|
|
USBTMC Driver Installation Note
|
1.0
|
配件
Rack Mount Kit
RK02
19 Inch rack mount kit for one or two half-rack B&K Precision meters and instruments. Includes only front-end hardware and is not intended to be a load-bearing piece of hardware. To support the weight of the equipment, please contact your rack manufacturer for specific supporting hardware.
- MSRP: $69
Red and Black CAT III (IV) 1000V (600V) Test Leads
TL37
Right-angled sheathed banana replacement 10A test leads for digital multimeters.
- MSRP: $15
High Performance Bench DMM Accessory Kit
TL500B
This kit of accessories was assembled to facilitate requirements by high-performance bench digital multimeters (DMM's) users. All the most popular accessories in one kit. The kit offers MiniProbe test probe, with spring-loaded tips, for fine probing; MiniPRO Test Clips for small and MiniFlex Test Clips for micro connections; and for those larger test points, both spade lug and banana plug adapters, two pairs of test leads for 4-wire measurements or calibration hookups, an insulated BNC male to sheathed banana jack adapter, and an insulated SMD Tweezer set for surface-mount component testing.
- Silicone jacketed test lead wire with UL Listing
- MiniProbes w/Spring loaded Stainless Steel Tips
- Packaged in Plastic Case
Kit Contains:
(4) Test Lead 4mm Sheathed P-RaP Silicon 0.75, 40": (2) Black, (2) Red
(2) Spring Tip Mini-Probe-4mm Jack: (1) Black, (1) Red
(1) Insulated BNC male Adapt-4mm Safety Jacks
(2) Adapter 4mm Banana Plug to Jack: (1) Black, (1) Red
(2) Mini Flex Clip-4mm Jack-Silicon 0.40, 10 cm: (1) Black, (1) Red
(2) Adapter 6mm Spade 4mm-Jack: (1) Black, (1) Red
(2) Lead minipro-J-PVC 0.40, 10 cm: (1) Black, (1) Red
(1) Tweezer Test Lead Set- 4mm P, w/PVC pouch
Specifications
|
Temperature |
-20 to +80 ºC |
|
RoHS (2002/95/EC) |
Compliant |
- MSRP: $278
Maxi-Pro DMM Kit
TL50B
- Complete accessory kit for all your testing needs.
- Includes soft, flexible silicone lead wire easy movement and Tri-Fold Velcro Pouch for convenient storage.
- 1000 V, CAT III (600 V, CAT IV)
- UL Listed test leads
- Silicone lead wire length 60" (1.5m)
- Tri-fold Velcro Pouch
- MSRP: $133
Rack mount kit for select 2U models
RK2US
The RK2US is for rack mounting select 2U models in either a side-by-side configuration or single unit configuration where a provided blank is used to fill the empty space. The shelf-like design offers added support and simplifies instrument mounting. The sides are shaped to optimize airflow for instruments with side cooling fans. Front end mounting hardware is included. See dimensions in the instruction manual.
- MSRP: $157