Model 7357
Process Multimeter, 50.000 counts, TRMS AC+DC with current source and loop power
1 yr Warranty
No distributors seem to have what you're looking for in stock. You can try searching again with a different part number or visit our
Overview
Multimeter
- Voltage measuremet up to 1000V TRMS AC+DC and 1000V DC
- Basic accuracy: 0,05%
- Current measurement up to 1A
- Frequency measurement
- Resistance measurement up to 50 Mohms
- Continuity test with buzzer
- Diode test
- Digital filter (low-pass)
Process calibrator
- Current source: 4-20mA or 0-20mA
- Modes: steps, pre-defined values, user defined values
- Manual ot automatic current slopes
- Simulator mode (energy supplied by application)
- Power loop mode, with HART capability (250 ohms serial resistor)
General features
- 100 mesurements memory
- MIN/MAX/AVG, REL, Auto-HOLD functions
- USB (opto isolated) interface
- Panoramic LCD, with auto-backlight
- PC application software supplied
- Safety: 600V CAT IV and 1000V CAT III
Accessories
Straight fixed banana plug test leads (4mm)
SA100
- 4mm test probe
- Length: 1m
- Max current: 12A
- Set of 1 red and 1 black
- Safety: CAT III - 1000V and CAT IV - 600V
Right angle banana plug test lead set (4mm)
SA101
- 4mm test probe
- Length: 1m
- Max current: 12A
- Set of 1 red and 1 black
- Safety: CAT III - 1000V and CAT IV - 600V
Straight fixed banana plug test leads (2mm tip)
SA150
- 1.2m length
- 2mm test probe
- 4mm safety banana plug (instrument side)
- PVC cable
- Max current: 12A
- Set of 1 black, 1 red
- Safety: 1000V CAT IV according to new IEC61010-031:2008
IP2X test leads set with right angle safety banana
SA158
- IP2X test probes with 4mm tips
- Length: 1.2m
- PVC cable
- Max current: 12A
- Test probes with retractable and lockable sleeves
- Set of 1 red, 1 black
- Safety: 600V CAT IV and 1000V CAT III according to new IEC61010-031:2008
Replacement Analog Remote Control Connector
RMTCTLCNTR
Replacement Analog Remote Control Connector.
- For models:
- 1685B Series
- 1900B Series
- 9103 9104 Series
16-channel isolated logic box
917008000
- 16 isolated logical channels (250V)
- Direct connection to the data recorder
- Compatible with all B&K data recorders
- Power supply for external sensor
- 3 Alarms (output)
- Input with safety bananas or fast connectors
- Supplied with interface cable and fast connectors
- Enables conversion of a AC voltage (for example 120 V, 50 Hz) into a logic HIGH signal
- Provides power supplies for external accessories such as sensors: 3.3V, 5V or 12V.
Rackmount kit for DAQ3120
RKDAQ
RKDAQ is a rackmount kit for the DAQ3120
- The kit holds up to two DAQ3120 systems
- 2U in size and fits in a standard 19” rack
Connecting cable with bananas (female)
902407100
This cable is designed to connect a DAS220 or DAS240 input (channel) to your application.
It is fitted with 4mm (female) banana-type safety connectors for easy connection to your application.
Supplied in packs of 10.
Active test probe for MW9090 and MW9091
9090PROBE
Replacement active probe for MW9090 and MW9091 insulation controllers, with integrated test button for triggering measurement without pressing the device.
Capteur de courant mini Flex 30-300-3000A pour analyseurs d'énergie (boucle 48cm)
A1502
Pince ampèremétrique flexible monophasée (bobine de Rogowski) avec trois plages de mesure sélectionnables (longueur du capteur : 48 cm, diamètre maximal du conducteur : 14 cm). Ne nécessite pas d'alimentation externe, car elle est alimentée par l'instrument de mesure.