Model MW3031
400A AC/DC clamp-on meter (with10 mA resolution)
1 yr Warranty
DiscontinuedJan 01, 1970
No distributors seem to have what you're looking for in stock. You can try searching again with a different part number or visit our
Overview
There is no direct replacement for this product.
- Measurement of AC & DC jcurrents up to 400A
- High sensitivity: 40A range with 10mA resolution
- Jaw opening: 27mm
- DC and AC voltage up to 600V
- Resistance up to 40Mohms
- Frequencymeter up to 40kHz
- Voltage detector (non contact)
- Diode test and continuity test with beeper
- Automatic power-off
- LCD display
- Safety: 600V - CAT III
Accessories
Straight fixed banana plug test leads (4mm)
SA100
- 4mm test probe
- Length: 1m
- Max current: 12A
- Set of 1 red and 1 black
- Safety: CAT III - 1000V and CAT IV - 600V
Right angle banana plug test lead set (4mm)
SA101
- 4mm test probe
- Length: 1m
- Max current: 12A
- Set of 1 red and 1 black
- Safety: CAT III - 1000V and CAT IV - 600V
Straight fixed banana plug test leads (2mm tip)
SA150
- 1.2m length
- 2mm test probe
- 4mm safety banana plug (instrument side)
- PVC cable
- Max current: 12A
- Set of 1 black, 1 red
- Safety: 1000V CAT IV according to new IEC61010-031:2008
IP2X test leads set with right angle safety banana
SA158
- IP2X test probes with 4mm tips
- Length: 1.2m
- PVC cable
- Max current: 12A
- Test probes with retractable and lockable sleeves
- Set of 1 red, 1 black
- Safety: 600V CAT IV and 1000V CAT III according to new IEC61010-031:2008
Replacement Analog Remote Control Connector
RMTCTLCNTR
Replacement Analog Remote Control Connector.
- For models:
- 1685B Series
- 1900B Series
- 9103 9104 Series
16-channel isolated logic box
917008000
- 16 isolated logical channels (250V)
- Direct connection to the data recorder
- Compatible with all B&K data recorders
- Power supply for external sensor
- 3 Alarms (output)
- Input with safety bananas or fast connectors
- Supplied with interface cable and fast connectors
- Enables conversion of a AC voltage (for example 120 V, 50 Hz) into a logic HIGH signal
- Provides power supplies for external accessories such as sensors: 3.3V, 5V or 12V.
Rackmount kit for DAQ3120
RKDAQ
RKDAQ is a rackmount kit for the DAQ3120
- The kit holds up to two DAQ3120 systems
- 2U in size and fits in a standard 19” rack
Connecting cable with bananas (female)
902407100
This cable is designed to connect a DAS220 or DAS240 input (channel) to your application.
It is fitted with 4mm (female) banana-type safety connectors for easy connection to your application.
Supplied in packs of 10.
Active test probe for MW9090 and MW9091
9090PROBE
Replacement active probe for MW9090 and MW9091 insulation controllers, with integrated test button for triggering measurement without pressing the device.
