Modelo 2512
2510 Series
100 MHz, 1 GSa/s, Non-Isolated Handheld Digital Storage Oscilloscope
Price: $1220 / 3 Año(s) de garantía
DiscontinuedMar 09, 2022
No distributors seem to have what you're looking for in stock. You can try searching again with a different part number or visit our
Visión general
The 2512 has been replaced by the: 2512B
The 2510 Series handheld digital storage oscilloscopes provide floating measurement and recorder capabilities with a built-in digital multimeter (DMM), all in one portable and lightweight package. These versatile 60 MHz and 100 MHz bandwidth scopes offer 1 GSa/s sample rates, 2 Mpts waveform memory, 32 automatic measurements, and multiple recording functions to capture transient or long-term signal behavior. The 2510 Series allows engineers and technicians to make accurate and safe measurements when the signal reference is floating.
- 60 MHz and 100 MHz bandwidth
- 1 GSa/s sample rate
- Isolated 600 V CAT III input channels (models 2515/2516)
- 2 Mpts deep memory
- 32 automatic measurements
- FFT plus four additional math functions
- Built-in 6000-count DMM measures DC/AC voltage, DC/AC current, resistance, capacitance, diode, and continuity test
- Dedicated current measurement terminals
- Recorder and trend plot functions to log data
- PC software that lets you remotely control the oscilloscope and capture, save, and analyze waveform data
- USB host port for convenient storing and recalling of waveform data, setups, and screenshots on a USB flash drive
- Standard mini-USB device port for remote PC control
Modelos
| Product | Ancho de banda | Frecuencia de muestreo | Conductos | Interfaz | MSRP |
|---|
Documents
Documentos
Software
|
Descripción |
Versión |
Descargar |
|---|---|---|
|
Operating Software (Supports Windows(R) 7)
|
3.01.03.01.11
|
|
|
Windows XP/Vista/7 32-bit USB Driver
|
USB Driver
|
|
|
Windows 7 64-bit USB Driver
|
USB Driver
|
Accesorios
General Purpose BNC and N Adapter Kit
CC500
General Purpose BNC & N Type Adapter Kit provides a comprehensive range of in-series and between-series BNC and N Type coaxial adapters for basic RF testing and troubleshooting needs. The 12 piece kit, packaged in a convenient foam-lined storage case for easy selection and use, is ideal for all popular instruments. The kit contains the most commonly used BNC and N Type adapters for everyday testing. All components feature 50Ω impedance, gold plated center contacts, and low VSWR to ensure accurate repeatable measurements. Features: BNC & N Type 50Ω Connectors Gold plated center contacts Storage case Applications: Production Testing Stations Service & Repair Facilities Educational Test Benches
- MSRP: $142
High-Voltage Oscilloscope Probe, 10 kV, 40 MHz
PR-55
If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.
- X1000 Attenuation
- 100 Mohms / 1 pF Input Impedance
- Up to 40 MHz Bandwidth
- 80" (2.0m) Cable Length
- MSRP: $410
300 kHz AC/DC Oscilloscope Current Clamp Probe
CP62
The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.
- 50 mA to 100 A peak
- DC to 300 kHz
- MSRP: $588
150 MHz 1x/10x Oscilloscope Probe
PR150SA
- 17/150 MHz Bandwidth
- X1/X10 Attenuation
- Insulated BNC connector
- 47" (1.2m) Cable length
- 300 V CAT II
- Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter
- Meets IEC61010-031 CATII
- MSRP: $70