Model 9153
9150 Series
60V/9A Programmable DC Power Supply
Price: $1795 / 3 yr Warranty
DiscontinuedSep 06, 2018
No distributors seem to have what you're looking for in stock. You can try searching again with a different part number or visit our
Overview
The 9153 has been replaced by the: 9205
The 9150 series are high performance linear-regulated programmable DC power supplies that provides excellent performance and features not found in other supplies in this price category. These supplies are designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.
- Very low ripple and noise due to linear regulation
- Excellent display resolution
- Fast transient response time (<120 µs)
- SCPI compatible
- Communicate via USB Interface, using included USB to TTL serial converter cable
- Closed case calibration
- List mode operation for increased throughput
- Very quiet due to intelligent fan speed control
- For bench use or rack mountable
- Application Software for front panel emulation and simple test sequence generation included
- Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
- Over voltage protection
- Digital Volt Meter and Milliohm Meter
Models
| Product | Max Voltage | Max Current | Max Power | Number of Outputs | Interface | MSRP |
|---|
Documents
Documentation
Software
|
Description |
Version |
Download |
|---|---|---|
|
LabVIEW 2014 Drivers
|
1.2
|
|
|
LabVIEW 2020 Driver
|
1.2
|
|
|
IT-E132 and IT-E132B USB Cable Adapter Driver
|
v1.14.0
|
|
|
Operating Software (Supports Windows(R) 7)
|
V3.3
|
|
|
NI LabVIEW 2014 driver
|
1.0.1
|
|
|
LabVIEW Driver
|
V1.1
|
Accessories
Rack mount kit for select models
IT-E151
The IT-E151 is for rack mounting of compatible products in either a side-by-side configuration or single unit configuration where a provided blank is used to fill the empty space. The dimensions for the kit are 5.24" (133mm) by 19" (482.6mm).
Compatible models:
| - 1785B Series | - 8512 |
| - 9120A Series | - 8514 |
| - 9150 Series | - 8518 |
| - 9130B Series | - 8600 |
| - 8542B | - 8601 |
| - 8500/B | - 8602 |
| - 8502/B | - 9801 |
| - 8510/B | - 9200 Series |
- MSRP: $99
High current premium test lead accessory
TLPWR1
High quality red and black cable with externally braided wrap with large fork-type spade connectors for connecting to high current power supplies or DC loads.
- Length: 2 m
- Rated current: 60 A
- Gauge: 8 AWG
- Connector inner diameter: 8 mm (approximate)
- Connector outer width: 15 mm (approximate)
- Wire material: flexible silicon jacket
- MSRP: $115
RS232 to TTL Interface Kit
IT-E131B
This is the RS232 to TTL interface kit includes both the RS232 to TTL adapter and a RS232 DB9 to DB9 cable.
- MSRP: $67
USB to TTL Interface
IT-E132B
This is the USB to TTL interface replacement part that was originally included with its paired product. A standard USB cable is included.
- MSRP: $66
100 cm Premium Spade Connector Test Lead Set
TLPWR31
High quality red and black cable dual diameter spade connectors for connecting to power supplies or DC loads.
- Length: 1 meter
- Rated current: 30 A
- Connectors: 6/4 mm Spade lug
- Wire material: flexible silicon jacket
- MSRP: $48
200 cm Premium Spade Connector Test Lead Set
TLPWR32
High quality red and black cable dual diameter spade connectors for connecting to power supplies or DC loads.
- Length: 2 meter
- Rated current: 30 A
- Connectors: 6/4 mm Spade lug
- Wire material: flexible silicon jacket
- MSRP: $59
Additional Resources
|
Resource Name |
Description |
|---|---|
|
Power Supply Selection Guide
|