Model 4047B
20 MHz Dual Channel Function / Arbitrary Generator
Price: $865 / 3 yr Warranty
Name | Qty | Last Updated | ||
---|---|---|---|---|
TEST EQUIPMENT DEPOT (FOTRONIC) | 2 | 2024-10-14 | ||
DIGI-KEY | 11 | 2024-10-14 | ||
SEFRAM | 1 | 2024-10-14 |
Overview
The 4047B Dual Channel Function/Arbitrary Waveform Generator is capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. CH1 and CH2 outputs are fully independent with individual on/off buttons and can both be varied from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit). The generator provides linear and logarithmic sweep capabilities, AM/FM/PM/FSK/PWM modulation, and a continuously variable DC offset to inject signals directly into circuits at the correct bias level. Separate output amplitude and DC offset amplifiers let you set a large DC offset (e.g. ± 4.99 V) with a small amplitude output signal (e.g. 10 mV).
The 4047B’s dual architecture, typically found in more expensive generators only, provides all the benefits of a DDS and a true point-by-point arbitrary waveform generator (AWG), without any limitations imposed by either technology.
- Dual-channel operation with each channel providing the rated amplitude (10 Vpp) over the entire frequency range
- Sine and square waveforms up to 20 MHz
- True point-by-point 14-bit, 125 MSa/s, 16-kpt arbitrary waveform generator
- Seamless integration with B&K Precision’s waveform editing software WaveXpress, allowing users to generate complex arbitrary waveforms
- Bright color display with waveform preview
- Synchronize the phase of both channels with the push of a button
- AM, FM, PM, FSK, and PWM internal and external modulation capabilities
- Gate and burst mode
- Low-jitter square wave generation for simulating reliable clock signals, generating triggers, or validating serial data buses
- USB interface and SCPI-compliant command set
- Internal/external triggering
- Gate and burst mode
- Built-in counter
- Short circuit protection for resistive and capacitive loads on outputs and overvoltage protection on inputs
Documents
Documentation
Software
Description |
Version |
Download |
---|---|---|
Operating Software (Supports Windows(R) 7/8.1/10)
|
11April2017
|
|
USB Driver
|
041013
|
Accessories
BNC Breakout to Alligator Clips
CC-21
Standard BNC to Alligator clips test leads.
- 50 ohm impedance
- RG58C/u cable
- 500Vrms voltage rating
- 40" cable length
- MSRP: $14
Function Generator Test Leads Set
TLFG
General purpose test probe set that includes BNC to BNC cables, BNC adapters and test clips.
- MSRP: $122