Modèle 2652
3.3 GHz Handheld Spectrum Analyzer with Tracking Generator
2 an(s) de garantie
DiscontinuedSep 24, 2009
No distributors seem to have what you're looking for in stock. You can try searching again with a different part number or visit our
Généralités
The 2652 has been replaced by the: 2652A
B&K Precision's 2652 handheld spectrum analyzer is small and exceptionally light weight, yet delivers performance and features comparable to a full size bench spectrum analyzer. The 2652 is a 2650 with a tracking generator added and can be used to rapidly determine transmission characteristics of two-port RF devices. With its ease of use, great performance and broad functionality, the 2652 is an ideal tool for engineers and technicians who perform field measurements in the 50kHz to 3.3GHz range.
Applications:
- Frequency response measurements of passive components such as RF cables, filters, and attenuators
- Installation, maintenance, and trouble shooting of wireless communication systems such as W-CDMA/CDMA, GSM, WLAN and Bluetooth
- Detection of signal interference and undesired emissions
- TV and broadcasting
- Antenna alignment
- EMI compliance (E & H field measurements with optional accessories)
Accessoires
Sonde pour champ magnétique pour BK2650 ou 2658
PR 26M
À l'aide d'une sonde de champ magnétique, les séries 2650 et 2650A sont capables de mesurer avec précision la distribution du champ magnétique sur un PCB (circuit imprimé) ou un IC (circuit intégré). Le détecteur d'intensité de champ magnétique à l'intérieur de la sonde consiste en une structure en boucle blindée utilisant une technologie de carte multicouche en vitrocéramique avec des caractéristiques de haute fréquence. Cela permet de détecter uniquement les composantes du champ magnétique. La sonde peut mesurer sur une large gamme de fréquences allant de 10 MHz à 3 GHz. Les données de compensation de la sonde étant déjà préchargées dans l'analyseur, l'intensité du champ magnétique est affichée directement en dBuA/m. La sonde est livrée avec un adaptateur SMA (femelle) vers M (mâle) entre les séries.
PC Interface Software for model 2650/2658
AK 2650
The AK 2650 software and serial interface cable allows the 2650 & 2658 to display screen resolutions on a PC that are four times greater then the 250 points displayed on the horizontal axis of the 2650's LCD display. The 2650 & 2658 samples its input at 1000 points per sweep and it can output these points through its RS 232 port to a PC (the maximum transfer rate is 38,400bps). The AK 2650 not only allows for clearer screen images but it also allows spectrum analyzer setup via a PC.
Dipole Antenna (0.8 to 1GHz) for model 2650/2658
AN 301
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
Dipole Antenna (1.25 to 1.65GHz) for model 2650/2658
AN 302
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
Dipole Antenna (1.7 to 2.2GHz) for model 2650/2658
AN 303
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
Dipole Antenna (2.25 to 2.65GHz) for model 2650/2658
AN 304
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
Dipole Antenna (390 to 410MHz) for model 2650/2658
AN 305
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
Dipole Antenna (4.7 to 6.2GHz) for model 2658
AN 306
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
100-240VAC, 50/60Hz AC Adapter for model 2650/2658
BC 2650
AC adapter for models 2650 & 2658. The BC 2650 accepts 100 to 240VAC, 50/60Hz and outputs through it pin jack a 5V/4A DC voltage to power the 2650 & 2650.
Ni-MH Battery Pack for model 2650/2658
BP 2650
Replacement battery for models 2650 & 2658. A fully charged battery has an approximate operation time of 100 minutes (with back light off).
Soft Carrying Case for models 2650/2658
LC 2650
Leather textured carrying case with strap to carry and protect model 2650.