Modèle 2559
2550 Series
300 MHz, 2 GSa/s, 4-Ch Digital Storage Oscilloscope
3 an(s) de garantie
DiscontinuedOct 27, 2020
No distributors seem to have what you're looking for in stock. You can try searching again with a different part number or visit our
Généralités
The 2559 has been replaced by the: 2569
The 2550 series digital storage oscilloscopes deliver performance and value in 2-channel and 4-channel configurations. With bandwidth from 70 MHz to 300 MHz and 2 GSa/s sample rates, these oscilloscopes offer 24 kpts/Ch waveform memory, 32 automatic measurements, and advanced triggering capabilities including math functions. Engineered to allow you to see more of your signal under test, the 2550 series’ widescreen 7” TFT display offers a significantly larger viewing area than typical economy oscilloscopes (5.7”).
- Bandwidth up to 300 MHz
- 2 GSa/s sample rate
- 4-channel acquisition (on select models)
- Large 7" widescreen color display
- 32 automatic measurements
- FFT plus four additional math functions
- Built-in context sensitive help system
- 50 Ω input coupling
- PC software that lets you remotely control the oscilloscope and capture, save, and analyze waveform data
- Front and rear panel USB host port for convenient storing and recalling of waveform data, setups, and screenshots on a USB flash drive
- Standard LAN (supports SCPI) and USB device port (USBTMC compliant) for remote PC control
Download waveforms from B&K oscilloscopes, AWGs, or load them from CSV/text files.
Modèles
| Produit | Bande Passante | Echantillonnage | Voies | Interface | MSRP |
|---|
Documents
Documentation
Logiciels
|
Description |
Version |
Téléchargement |
|---|---|---|
|
USBTMC Driver Installation Note
|
1.0
|
|
|
Operating Software (Supports Windows(R) 7/8.1/10)
|
11April2017
|
|
|
Operating Software (Windows 7/8.1/10)
|
1.02.01.18
|
|
|
LabVIEW 2011 Drivers
|
1.0.0
|
|
|
LabVIEW 2014 SP1 Drivers
|
1.0.0
|
Accessoires
General Purpose BNC and N Adapter Kit
CC500
Sonde d'oscilloscope Haute Tension, 10 kV, 40 MHz
PR-55
Si les tensions que vous devez mesurer sur votre oscilloscope dépassent les spécifications de la sonde à usage général, BK Precision propose des sondes à tension plus élevée.
- Atténuation X1000
- Impédance d'entrée 100 MOhms / 1 pF
- Bande passante jusqu'à 40 MHz
- Longueur de câble 80" (2,0 m)
500 MHz 10x Oscilloscope Probe
PR500B
Pince ampèremétrique pour oscilloscope AC/DC 300 kHz
CP62
La sonde de courant CP62 permet à un oscilloscope à usage général d'afficher des signaux de courant alternatif et continu jusqu'à 100 A crête (70 A RMS). La sonde de courant CP62 peut également effectuer des mesures de courant alternatif et continu avec un multimètre à l'aide de l'adaptateur de prise TL62 (BNC vers banane) recommandé.
- 50 mA à 100 A crête
- DC à 300 kHz