Model 2125C
30 MHz Delayed Sweep Analog Oscilloscope with Probes
1 yr Warranty
DiscontinuedMay 19, 2019
No distributors seem to have what you're looking for in stock.
You can try searching again with a different part number or visit our
Overview
The 2125C has been replaced by the: 2190E
B&K Precision's model 2125C is a dual trace oscilloscope with a delayed sweep that offers high performance at a low price. Most competitor's entry level oscilloscopes have a 20 MHz bandwidth, while B&K Precision's models 2125C has a bandwidth of 30 MHz. This oscilloscope is built by and backed by B&K Precision, a company that has been selling reliable, durable, value priced test instruments for over 60 years.
- Delayed sweep in 23 steps
- Built in component tester for capacitors, inductors, diodes, transistors, zener diodes
- 23 step time base to 0.1ms/div
- Deluxe handle/tilt stand
Documents
Documentation
Software
|
Description |
Version |
Download |
|---|
Accessories
General Purpose BNC and N Adapter Kit
CC500
General Purpose BNC & N Type Adapter Kit provides a comprehensive range of in-series and between-series BNC and N Type coaxial adapters for basic RF testing and troubleshooting needs. The 12 piece kit, packaged in a convenient foam-lined storage case for easy selection and use, is ideal for all popular instruments. The kit contains the most commonly used BNC and N Type adapters for everyday testing. All components feature 50Ω impedance, gold plated center contacts, and low VSWR to ensure accurate repeatable measurements. Features: BNC & N Type 50Ω Connectors Gold plated center contacts Storage case Applications: Production Testing Stations Service & Repair Facilities Educational Test Benches
10:1/Direct 90 MHz Scope Probe
PR 33A
- 15/90MHz Bandwidth
- X1/X10 Attenuation
- 48" (1.2m) Cable length
- Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter.
- IEC61010-2-031
High-Voltage Oscilloscope Probe, 10 kV, 40 MHz
PR-55
If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.
- X1000 Attenuation
- 100 Mohms / 1 pF Input Impedance
- Up to 40 MHz Bandwidth
- 80" (2.0m) Cable Length
300 kHz AC/DC Oscilloscope Current Clamp Probe
CP62
The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.
- 50 mA to 100 A peak
- DC to 300 kHz