Modèle 889B

Bench LCR/ESR Meter with Component Tester

3 an(s) de garantie

Discontinued

Oct 17, 2021

No distributors seem to have what you're looking for in stock. You can try searching again with a different part number or visit our Where to Buy Page to get a link to your preferred stocking distributor where you can contact them and request a lead-time or quote. If applicable, download the Request Quote form for the corresponding product.

Généralités

Discontinued

The 889B has been replaced by the: 891

The B&K Precision Model 889B Synthesized LCR/ESR Meter with Component Tester is a high accuracy test instrument used for measuring inductors, capacitors and resistors with a basic accuracy of 0.1%. Also, with the built-in functions of DC/AC Voltage measurements and Diode/Audible Continuity checks, the Model 889B can not only help engineers and students to understand the characteristic of electronics components but also being an essential tool on any service bench.

Features:

  • Measurement parameters: ACV, DCV, Z, L, C, DCR, ESR, D, Q, and θ
  • LCR test conditions: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz, 200 kHz , 1 Vrms, 0.25 Vrms, 0.05 Vrms, 1 VDC (DCR mode only)
  • Measures DCV to 600 V and ACV to 600 Vrms @ 40 ~ 1 kHz
  • Measures DCA to 2 A and ACA to 2 Arms @ 40 ~ 1 kHz
  • 0.1% basic accuracy
  • Diode and continuity measurements
  • Dual LCD display
  • BNC to Kelvin Clip probe included
  • USB (Virtual COM) Interface

Documents

Documentation

Logiciels

Description

Version

Téléchargement
USB Driver
v1.0
889B_USB_DRIVER.zip

Accessoires

TL89F1

Accessoire de test pour pont RLC

TL89F1

Dispositif d'essai pour tester facilement les composants à plomb axial et radial.

Fréquence : DC à 10MHz
DC Bias:+/- 40V peak max (AC+DC)
Température de fonctionnement : 0 à 40 degrés C
Connexion des bornes : BNC à 4 fentes d'insertion de bornes (radiales ou axiales)

TL89K1

Pinces de test Kelvin

TL89K1

Pinces de test BNC vers pince Kelvin pour le test des composants plombés.

TL89S1

Accessoire de test pour SMD

TL89S1

Dispositif de test pour la mesure de petits dispositifs montés en surface (SMD)

Fréquence : DC à 10MHz
DC Bias:+/- 40V peak max (AC+DC)
Température de fonctionnement : 0 à 40 degrés C
Connexion des bornes : BNC, 4 paires de bornes
Dimensions (WxHxD) : 5.125 x 2.37 x 3.31 pouces (130 x 60.3 x 84mm) approximativement
Poids : 0.67 lbs (0.305 kg) approximativement