Modelo 5493C
Multímetro Digital de Banco de 6½ Dígitos
Price: $1170 / 3 Año(s) de garantía
| Name | Qty | Last Updated | ||
|---|---|---|---|---|
| SEFRAM | 12 | 2025-08-30 | ||
| FARNELL | 5 | 2025-08-30 | ||
| TME | 1 | 2025-08-30 | ||
| TESTEQUITY | 6 | 2025-08-30 | ||
| MOUSER ELECTRONICS | 2 | 2025-08-29 | ||
| RS Europe | 5 | 2025-08-29 | ||
| TEST EQUIPMENT DEPOT (FOTRONIC) | 1 | 2025-08-29 | ||
| Buerklin | 1 | 2025-08-29 | ||
| DIGI-KEY | 55 | 2025-08-29 |
Visión general
Los multímetros de banco de 5½ y 6½ dígitos de la Serie 5490C, están diseñados para brindar mediciones exactas, repetibles y fáciles. Su amplio rango de medición con velocidad de hasta 1000 lecturas por segundo, y exactitud básica DCV de hasta 35 ppm, ofrecen resultados de medición estables con rapidez y precisión. Estos multímetros de propósito general son ideales para aplicaciones exigentes de ingeniería, producción y servicio.
Su pantalla LCD de 4.3 pulgadas ofrece gran variedad de modos de pantallas para exhibir sus mediciones, incluyendo modos numéricos, barras gráficas, tablas de tendencias e histograma. Las funciones matemáticas integradas, visualización de estadísticas, y capacidad de mediciones duales ofrecen formas muy convenientes para capturar y analizar datos de medición.
- 12 funciones de medición: DCV, ACV, DCI, ACI, resistencia de 2 y4 cables, capacitancia, frecuencia, diodo, temperatura, prueba de continuidad, proporción DCV (ratio)
- Pantalla LCD de 4.3 pulgadas, de color y alto contraste
- Velocidad de mediciones de hasta 1.000 lecturas/s
- Precisión básica DCV de hasta 35 ppm (0.0035%)
- Opciones de pantallas numéricas, barra gráfica e histograma
- Exhibe las estadísticas de Mín., Máx., Pico-a-Pico, Promedio y Deviación Estándar simultáneamente
- Funciones matemáticas Nula, dB, dBm, %, mx+b, y corre/para
- Mediciones de frecuencia AC de hasta 1 MHz
- Búfer de almacenaje interno de hasta 10.000 lecturas
- Medidas de resistencias de 2 y 4 cables hasta 10 Ω
- Medición de pantalla dual
- Terminales de entrada en el panel posterior para uso en estante (sólo en los modelos de 6½ dígitos)
- Interfaces USB (USBTMC-compatible), LAN, y RS232 estándar, compatible con comandos SCPI y opción con GPIB
- Puerto USB host en el panel frontal para para exportar mediciones, capturas de pantalla y guardar/recuperar configuraciones
- Provee un driver LabVIEWTM y software de operación para control remoto del instrumento, monitoreo de mediciones y registro de datos
Modelos
Documents
Documentos
Software
|
Descripción |
Versión |
Descargar |
|---|---|---|
|
Operating Software (No Run-Time)
|
1.0.1
|
|
|
Operating Software
|
1.0.1
|
|
|
LabVIEW 2020 Driver
|
1.0.0
|
|
|
USBTMC Driver Installation Note
|
1.0
|
Accesorios
Rack Mount Kit
RK02
19 Inch rack mount kit for one or two half-rack B&K Precision meters and instruments. Includes only front-end hardware and is not intended to be a load-bearing piece of hardware. To support the weight of the equipment, please contact your rack manufacturer for specific supporting hardware.
- MSRP: $69
Red and Black CAT III (IV) 1000V (600V) Test Leads
TL37
Right-angled sheathed banana replacement 10A test leads for digital multimeters.
- MSRP: $15
General Purpose DMM Kit
TL130B
If you need only one basic accessory kit for your meter, this is the one. Attach probes or clips to the sheath plug to complete your test. Soft, flexible silicone leads make movement easy. Kit is voltage and current rated for electronic or electrical applications.
- Probes are 1000 V, CAT III (600 V, CAT IV)
- Alligator clips are 300 V, CAT II 5A
- UL Listed test leads
- Silicone lead wire length 60" (1 m)
- Tri-fold velcro pouch
- MSRP: $100
High Performance Bench DMM Accessory Kit
TL500B
This kit of accessories was assembled to facilitate requirements by high-performance bench digital multimeters (DMM's) users. All the most popular accessories in one kit. The kit offers MiniProbe test probe, with spring-loaded tips, for fine probing; MiniPRO Test Clips for small and MiniFlex Test Clips for micro connections; and for those larger test points, both spade lug and banana plug adapters, two pairs of test leads for 4-wire measurements or calibration hookups, an insulated BNC male to sheathed banana jack adapter, and an insulated SMD Tweezer set for surface-mount component testing.
- Silicone jacketed test lead wire with UL Listing
- MiniProbes w/Spring loaded Stainless Steel Tips
- Packaged in Plastic Case
Kit Contains:
(4) Test Lead 4mm Sheathed P-RaP Silicon 0.75, 40": (2) Black, (2) Red
(2) Spring Tip Mini-Probe-4mm Jack: (1) Black, (1) Red
(1) Insulated BNC male Adapt-4mm Safety Jacks
(2) Adapter 4mm Banana Plug to Jack: (1) Black, (1) Red
(2) Mini Flex Clip-4mm Jack-Silicon 0.40, 10 cm: (1) Black, (1) Red
(2) Adapter 6mm Spade 4mm-Jack: (1) Black, (1) Red
(2) Lead minipro-J-PVC 0.40, 10 cm: (1) Black, (1) Red
(1) Tweezer Test Lead Set- 4mm P, w/PVC pouch
Specifications
|
Temperature |
-20 to +80 ºC |
|
RoHS (2002/95/EC) |
Compliant |
- MSRP: $278
Maxi-Pro DMM Kit
TL50B
- Complete accessory kit for all your testing needs.
- Includes soft, flexible silicone lead wire easy movement and Tri-Fold Velcro Pouch for convenient storage.
- 1000 V, CAT III (600 V, CAT IV)
- UL Listed test leads
- Silicone lead wire length 60" (1.5m)
- Tri-fold Velcro Pouch
- MSRP: $133
Rack mount kit for select 2U models
RK2US
The RK2US is for rack mounting select 2U models in either a side-by-side configuration or single unit configuration where a provided blank is used to fill the empty space. The shelf-like design offers added support and simplifies instrument mounting. The sides are shaped to optimize airflow for instruments with side cooling fans. Front end mounting hardware is included. See dimensions in the instruction manual.
- MSRP: $157