Model 2555
2550 Series
100 MHz, 2 GSa/s, 4-Ch Digital Storage Oscilloscope
3 yr Warranty
DiscontinuedMay 23, 2023
No distributors seem to have what you're looking for in stock.
You can try searching again with a different part number or visit our
Overview
The 2555 has been replaced by the: 2565B
The 2550 series digital storage oscilloscopes deliver performance and value in 2-channel and 4-channel configurations. With bandwidth from 70 MHz to 300 MHz and 2 GSa/s sample rates, these oscilloscopes offer 24 kpts/Ch waveform memory, 32 automatic measurements, and advanced triggering capabilities including math functions. Engineered to allow you to see more of your signal under test, the 2550 series’ widescreen 7” TFT display offers a significantly larger viewing area than typical economy oscilloscopes (5.7”).
- Bandwidth up to 300 MHz
- 2 GSa/s sample rate
- 4-channel acquisition (on select models)
- Large 7" widescreen color display
- 32 automatic measurements
- FFT plus four additional math functions
- Built-in context sensitive help system
- 50 Ω input coupling
- PC software that lets you remotely control the oscilloscope and capture, save, and analyze waveform data
- Front and rear panel USB host port for convenient storing and recalling of waveform data, setups, and screenshots on a USB flash drive
- Standard LAN (supports SCPI) and USB device port (USBTMC compliant) for remote PC control
Download waveforms from B&K oscilloscopes, AWGs, or load them from CSV/text files.
Models
| Product | Bandwidth | Sample Rate | Channels | Interface | MSRP |
|---|
Documents
Documentation
Software
|
Description |
Version |
Download |
|---|---|---|
|
USBTMC Driver Installation Note
|
1.0
|
|
|
Operating Software (Supports Windows(R) 7/8.1/10)
|
11April2017
|
|
|
Operating Software (Windows 7/8.1/10)
|
1.02.01.18
|
|
|
LabVIEW 2011 Drivers
|
1.0.0
|
|
|
LabVIEW 2014 SP1 Drivers
|
1.0.0
|
Accessories
300 kHz AC/DC Oscilloscope Current Clamp Probe
CP62
The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.
- 50 mA to 100 A peak
- DC to 300 kHz
High-Voltage Oscilloscope Probe, 10 kV, 40 MHz
PR-55
If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.
- X1000 Attenuation
- 100 Mohms / 1 pF Input Impedance
- Up to 40 MHz Bandwidth
- 80" (2.0m) Cable Length
150 MHz 1x/10x Oscilloscope Probe
PR150B
- 17/150 MHz Bandwidth
- X1/X10 Attenuation
- 47" (1.2m) Cable length
- 300 V CAT II
- Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter
- Meets IEC61010-031 CATII