模型 2512B

2510B 系列

200 MHz, 1 GSa/s, Non-Isolated Handheld Digital Storage Oscilloscope

价格: $2310 / 3 年保修

Name Qty Last Updated
DIGI-KEY 1 2026-06-06
MOUSER ELECTRONICS 3 2026-06-06

概述

2510B 手持式數位儲存示波器將浮動測量和記錄功能與內建數位萬用電錶 (DMM) 整合於一體，輕巧便攜。這些功能全面的示波器頻寬分別為 100 MHz 和 200 MHz，提供兩個通道，取樣率為 1 GSa/s，儲存深度為 12 Mpts，可自動測量 38 種訊號，並具備多種記錄功能，能夠捕捉瞬態或長期訊號特性。 2515B 和 2516B 型號在示波器通道、萬用電錶通道、電源輸入以及 USB 主機和裝置連接埠之間實現了完全隔離。

  • 100 MHz 和 200 MHz 頻寬
  • 1 GSa/s 採樣率
  • 完全隔離式 1000 V CAT II 和 600 V CAT III 輸入額定值（型號 2515B / 2516B）
  • 非隔離式 300 V CAT II 輸入額定值（型號 2511B / 2512B）
  • 12 Mpts 儲存深度
  • 支援 IIC、SPI、UART、CAN 和 LIN 協定的串行匯流排解碼
  • FFT 以及 7 種附加數學函數
  • 內建 6000 位元數位萬用電錶，可測量直流/交流電壓、直流/交流電流、電阻、電容、二極體和通斷性
  • 記錄器和趨勢圖功能，用於記錄數據
  • USB 主機端口，方便地將波形資料、設定和螢幕截圖儲存到 USB 並進行調用
  • 標準 micro-USB 設備端口，用於遠端 PC 控制

楷模

产品 Bandwidth Sample Rate Channels 界面 价格

Documents

文檔

軟件

EasyScopeX.zip - version: 1.02.01.22
Operating Software (Windows 7/8/10)

配件

CP62

300 kHz 交流/直流示波器電流夾頭

CP62

CP62 電流探頭可使通用示波器顯示高達 100 A 峰值（70 A RMS）的交流和直流電流訊號。使用建議的配件 TL62（BNC 轉香蕉插頭）轉接器，CP62 電流探頭也可與萬用電錶配合進行交流和直流測量。

  • 峰值：50 mA 至 100 A
  • 頻率範圍：直流至 300 kHz

CP62 使用手冊

MSRP: $0
PR-55

High-Voltage Oscilloscope Probe, 10 kV, 40 MHz

PR-55

If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.

  • X1000 Attenuation
  • 100 Mohms / 1 pF Input Impedance
  • Up to 40 MHz Bandwidth
  • 80" (2.0m) Cable Length

Manual

MSRP: $410
CP62

300 kHz AC/DC Oscilloscope Current Clamp Probe

CP62

The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.

  • 50 mA to 100 A peak
  • DC to 300 kHz

CP62 Manual

MSRP: $588
PR65

30 MHz High-Voltage Differential Probe, 70 V / 700 V

PR65

The PR65 differential probe enables earth-grounded oscilloscopes to make safe and accurate floating measurements between two voltage points. This probe is compatible with B&K Precision’s oscilloscopes, as well as other major manufacturers’ (with 1 MΩ input impedance) and can be powered by batteries (included), a universal mains adapter (included), or by USB equipped oscilloscopes.

The PR65 is cTUVus certified to IEC 61010-031: 2015, for user safety and confidence.

Applications include:

  • Precision power semiconductors
  • Switch-mode power supply design
  • Floating measurements
  • Power converter measurements
  • Precision motor drive measurements

Features:

  • 30 MHz bandwidth (-3 dB)
  • Maximum 700 V differential  (DC+ AC peak)
  • 7 V output, 10x / 100x attenuation
  • 1000 V CAT III rated
  • Spring hook probes, USB cord, power adapter, and batteries included

MSRP: $582
BP2510B

Replacement Li-Ion Battery for 2510B Series

BP2510B

Replacement Li-Ion battery for 2510B Series Handheld Oscilloscopes. A fully charged battery has an approximate operation time of 4 hours.

MSRP: $290
BE2510B

Replacement AC Power Adapter for 2510B Series

BE2510B

Input: 100 - 240 VAC, 50/60 Hz

Output: 9.5 VDC, 4A

MSRP: $90