Model 2682

Near Field Probe Kit

PR262

The PR262 near field probe kit includes both magnetic (H) and electric (E) field probes to help identify sources of electromagnetic radiation. The probes act similar to wide bandwidth antennas and are usually connected to a spectrum analyzer. The probes can also be used in immunity testing by feeding an RF signal into the probe and radiating it into the circuit. The wideband amplifier can be connected between the probe and the spectrum analyzer to increase the dynamic range of the measurements.

Contents

• H20 H-Field
• H10 H-Field
• H5 H-Field
• E5 E-Field
• 40 dB wideband amplifier (requires A-male to mini-B USB cable for power, not included)
• SMB to SMA cable
• SMA to N cable

 User manual

Reflection bridge with adapters

RB2680B

The RB2680B reflection bridge is used with a spectrum analyzer to measure VSWR, reflection coefficient or return loss. The kit includes 2 N(M) to N(M) adapters to connect to the spectrum analyzer ports.

• Frequency range 1 MHz to 2.5 GHz
• N (Female) type connector
• 50 Ω Impedance
• 5 dB Insertion loss
• 20 dB directivity

EMI measurement license key

EMI2680

This option enables the instrument’s EMI measurement function which includes pre-defined bandwidth set points of 200 Hz, 9 kHz and 120 kHz, a -6dB EMI filter, and the quasi-peak detector as specified by CISPR 16-1. Fill out the request form to acquire a license for the EMI License Key.

Reflection measurement license key

RFL2680

This option enables VSWR, reflection coefficient, and return loss measurements for tuning and determining the efficiency of antennas, filters, or RF transmission modules. Fill out the request form to acquire a license for the Reflection License Key.