模型 2194

100 MHz、1 GSa/s、4通道數位儲存示波器

价格: $745 / 3 年保修

Name Qty Last Updated
TME 3 2026-07-05
TESTEQUITY 3 2026-07-05
FARNELL 14 2026-07-05
Buerklin 1 2026-07-04
DIGI-KEY 42 2026-07-04
SEFRAM 6 2026-07-04
MOUSER ELECTRONICS 2 2026-07-04
RS Europe 43 2026-06-30

概述

2194 將性能和價值完美結合於一體，是一款便攜式示波器。此示波器採用 4 通道配置，頻寬為 100 MHz，最大取樣率為 1 GSa/s，最大儲存深度為 14 Mpts。 2194 型波形分析儀配備 7 吋寬螢幕顯示器，並擁有豐富的功能，包括分段擷取、FTT 和五種不同通訊​​協定的串列解碼。此型號是教育機構和業餘愛好者的理想選擇。

  • 100 MHz 頻寬
  • 4 個類比通道
  • 最大取樣率 1 GSa/s
  • 最大儲存深度 14 Mpts
  • 波形捕獲率高達每秒 100,000 個波形（普通模式）和 400,000 個波形（序列模式）
  • 7 吋 TFT-LCD 顯示屏，解析度 800 x 480
  • 多種觸發功能，包括脈衝寬度、行可選視訊和串行觸發
  • 分段擷取功能最多可儲存 80,000 幀
  • 串行解碼支援 I2C、SPI、UART、CAN 和 LIN 協議
  • FFT 函數和 7 種附加數學運算
  • 具有可調限值的遮罩工具，用於通過/失敗測試
  • 符合 LAN 和 USBTMC 標準的設備端口，用於連接 PC
  • USB 主機端口，用於保存和調用波形設定、資料和螢幕截圖

Documents

文檔

軟件

EasyScopeX.zip - version: 1.02.01.22
Operating Software (Windows 7/8/10)

配件

CP62

300 kHz 交流/直流示波器電流夾頭

CP62

CP62 電流探頭可使通用示波器顯示高達 100 A 峰值（70 A RMS）的交流和直流電流訊號。使用建議的配件 TL62（BNC 轉香蕉插頭）轉接器，CP62 電流探頭也可與萬用電錶配合進行交流和直流測量。

  • 峰值：50 mA 至 100 A
  • 頻率範圍：直流至 300 kHz

CP62 使用手冊

MSRP: $0
PR-55

High-Voltage Oscilloscope Probe, 10 kV, 40 MHz

PR-55

If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.

  • X1000 Attenuation
  • 100 Mohms / 1 pF Input Impedance
  • Up to 40 MHz Bandwidth
  • 80" (2.0m) Cable Length

Manual

MSRP: $410
CP62

300 kHz AC/DC Oscilloscope Current Clamp Probe

CP62

The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.

  • 50 mA to 100 A peak
  • DC to 300 kHz

CP62 Manual

MSRP: $588
PR65

30 MHz High-Voltage Differential Probe, 70 V / 700 V

PR65

The PR65 differential probe enables earth-grounded oscilloscopes to make safe and accurate floating measurements between two voltage points. This probe is compatible with B&K Precision’s oscilloscopes, as well as other major manufacturers’ (with 1 MΩ input impedance) and can be powered by batteries (included), a universal mains adapter (included), or by USB equipped oscilloscopes.

The PR65 is cTUVus certified to IEC 61010-031: 2015, for user safety and confidence.

Applications include:

  • Precision power semiconductors
  • Switch-mode power supply design
  • Floating measurements
  • Power converter measurements
  • Precision motor drive measurements

Features:

  • 30 MHz bandwidth (-3 dB)
  • Maximum 700 V differential  (DC+ AC peak)
  • 7 V output, 10x / 100x attenuation
  • 1000 V CAT III rated
  • Spring hook probes, USB cord, power adapter, and batteries included

MSRP: $582
PR67

30 MHz High Voltage Differential Probe, 140 V / 1400 V

PR67

The PR67 differential probe enables earth-grounded oscilloscopes to make safe and accurate floating measurements between two voltage points. This probe is compatible with B&K Precision’s oscilloscopes, as well as other major manufacturers’ (with 1 MΩ input impedance) and can be powered by batteries (included), a universal mains adapter (included), or by USB equipped oscilloscopes.

The PR67 is cTUVus certified to IEC 61010-031: 2015, for user safety and confidence.

Applications include:

  • Precision power semiconductors
  • Switch-mode power supply design
  • Floating measurements
  • Power converter measurements
  • Precision motor drive measurements

Features:

  • 30 MHz bandwidth (-3 dB)
  • Maximum 1400 V differential  (DC + AC peak)
  • 7 V output, 20x / 200x attenuation
  • 1000 V CAT III rated
  • Spring hook probes, USB cord, power adapter, and batteries included

MSRP: $582