Model 4054B
4050B Series
30 MHz Dual Channel Function/Arbitrary Waveform Generator
Price: $905 / 3 yr Warranty
Name | Qty | Last Updated | ||
---|---|---|---|---|
TESTEQUITY | 7 | 2024-10-14 | ||
FARNELL | 2 | 2024-10-14 | ||
NEWARK | 7 | 2024-10-14 | ||
DIGI-KEY | 20 | 2024-10-14 | ||
SEFRAM | 4 | 2024-10-14 | ||
MOUSER ELECTRONICS | 3 | 2024-10-11 | ||
VALUETRONICS | 1 | 2024-10-11 | ||
RS | 3 | 2024-10-11 |
Overview
The 4050B Series Dual Channel Function/Arbitrary Waveform Generators are capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. With an easy-to-read color display and intuitive user interface with numeric keypad, these instruments offer plenty of features including linear/logarithmic sweep, built-in counter, extensive modulation and triggering capabilities, a continuously variable DC offset, and a high performance 14-bit, 150 MSa/s arbitrary waveform generator. CH1 and CH2 outputs can both be varied from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit).
- 14-bit, 150 MSa/s, 16k point arbitrary waveform generator
- Two independent channels with individual output On/Off buttons
- Convenient channel copy, track and combine functions
- Synchronize the phase of both channels with the push of a button
- Low-jitter square wave generation for simulating reliable clock signals, generating triggers, or validating serial data buses
- Large 4.3-inch LCD color display
- AM/DSB-AM/ASK/FM/FSK/PM/PSK/PWM modulation functions
- Variable DC offset and adjustable duty cycle
- Internal/external triggering
- Gate and burst mode
- 196 built-in predefined arbitrary waveforms
- Built-in frequency counter
- Harmonics generator function
- LAN, USB device port (USBTMC-compliant), and front panel USB host port
- GPIB connectivity with optional USB-to-GPIB adapter
- PC software provided for arbitrary waveform editing
- Short circuit output protection
Models
Documents
Documentation
Software
Description |
Version |
Download |
---|---|---|
USBTMC Driver Installation Note
|
1.0
|
|
LabVIEW 2020 Drivers
|
1.1.0
|
|
Labview 2016 Driver
|
1.0.0
|
|
Operating Software (Supports Windows(R) 10)
|
1.1.1.36
|
Accessories
USB-to-GPIB Adapter
AK40G
The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.
- Powered through USB host connector
- Cable length approximately 56 inches (143cm)
- Communication Status LED and Power LED indicators
- GPIB interface supports Device mode only (not Controller mode)
- MSRP: $229
BNC Breakout to Alligator Clips
CC-21
Standard BNC to Alligator clips test leads.
- 50 ohm impedance
- RG58C/u cable
- 500Vrms voltage rating
- 40" cable length
- MSRP: $14
Function Generator Test Leads Set
TLFG
General purpose test probe set that includes BNC to BNC cables, BNC adapters and test clips.
- MSRP: $122